Overview
The Baer Brakes ReMaster 6801266RP is a gray anodized master cylinder with a 1-1/8 inch bore, right side outlet ports and a 2-bolt GM/Ford firewall flange. It builds hydraulic pressure from pedal travel for the brake circuits and is a compact choice for many Ford and GM applications. It works with long and short boosters, the included bullet, or manual brakes.
The body is gray anodized 6061 T6 billet aluminum, with black anodized caps and lid. Six allen screws hold the billet top in place, and the knurled screw-on caps make filling easier. The ports take inverted flare fittings with the removable brass seats, or banjo and straight fittings. Anodized ReMaster units carry laser-etched logos.
Key features
- Gray anodized body with black anodized caps and lid
- Fully machined 6061 T6 billet aluminum construction
- Right side outlet ports
- 3/8-24 outlet port design for inverted flare, banjo or straight fittings
- Laser-etched logos on anodized ReMaster units
- Machined, knurled screw-on caps for spill-free filling
- Optional proportioning valves available
Choosing banjo or flare
Fittings decide how brake lines attach to the outlets, and the choice affects both installation and later service. Inverted flare connections seal against brass seats and use tube nuts, which suits hard line work. Banjo connections use a hollow bolt and sealing washers, so they go on without a seat and can be easier to route tight to the firewall.
The gray anodized finish is a surface treatment, so clean the body with brake-safe solvent rather than abrasives that dull the coating. Keep the caps and lid tight after filling, and check the reservoir level as pads wear. Residue around the outlets should be inspected before the next drive.
- Decide on fittings before bending lines
- Use new washers on banjo connections
- Keep the anodized finish free of abrasive cleaners
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801266RP |
| UPC | 844165047599 |
| Series | ReMaster |
| Bore size | 1-1/8 inch (1.125) |
| Flange type | 2-bolt GM/Ford |
| Body material | 6061 T6 billet aluminum |
| Body color and finish | Gray, anodized |
| Caps and lid color and finish | Black, anodized |
| Port exit | Right side |
| Outlet ports | 2, 3/8-24 inch |
| Outlet fittings | Banjo without brass seat; 3/16 inch inverted flare with tube nuts and brass seat |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent, or 5.25oz per reservoir |
| Removable seats | Yes |
| Stroke | 1.3 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
The 2-bolt GM/Ford firewall flange suits many Ford and GM applications. Check fit against your vehicle’s year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A long push-rod hydro-boost or vacuum booster may need spacer 6260258 to keep this unit clear of the push-rod. Settle the banjo or inverted flare choice on the right side ports before the lines are fitted. Bleeder screws and hoses are not supplied, so plan to bleed the system once the cylinder is mounted.
What’s included
The package holds one master cylinder assembly plus 2 brass seats and 2 tube nuts, with cap and integral dual reservoir.
Not included: booster, bleeder screws and hoses, pressure switch, sensor, gasket, mounting hardware, proportioning valves, and any spacer 6260258 that a booster requires.














