Overview
The Trail Gear axle bracket kit, part number 110077-1-KIT, is a pair of link mounts cut from 3/16 inch plate steel. The mounts are meant to upgrade factory brackets and make a change from leaf springs to a 3-link or 4-link suspension easier.
It is a misc. mounting tab, sold as a pair, and it works with tubes of any diameter.
Key features
- Built from 3/16 inch plate steel
- Upgrades factory brackets
- Designed to ease a change from leaf springs to a 3-link or 4-link system
- Quantity: pair
- Works with any tube diameter
Setting up link geometry
A link conversion replaces the leaf springs with rods that control axle position, so the mounts carry the forces that the springs used to absorb. Once the links are in, pinion angle and caster become the main setup points, and both need to be measured rather than estimated. Small changes in mount position can shift the axle path noticeably, so check travel through its full range before the vehicle goes back on the trail.
Mounts of this type often wear at the bushings and the welds that hold them, so inspect those areas after the first few drives. Look for cracked welds, sloppy joints and uneven bushing wear. Driveline vibration at speed can point to an angle that needs correction. Plan the conversion as a whole, since links, brackets and axle components work together.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110077-1-KIT |
| UPC | 70000621748 |
| Material | Plate steel |
| Thickness | 3/16 inch |
| Type | Misc. mounting tab |
| Quantity | Pair |
| Tube diameter | Any |
| Fitment | Universal fit (no vehicle named) |
Vehicle fitment
Universal fit is the only fitment stated, with no vehicle named. Because these mounts relate to axle tube and link layout, check the mount against your own axle and suspension before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Swapping from leaf springs to a link system changes how the axle locates, so an alignment and driveline angle check is normal after the conversion. Compare these mounts with the factory brackets they replace before cutting or welding.
What’s included
A pair of link mounts.
Not included: Links, axle tubes and hardware.








