Overview
The Factory Leveling Spacer Kit, part number 62207K, is a steel leveling kit with a 1-inch front lift and a 3/4-inch rear lift. It fits the 2021–2026 Ford Bronco Sport and the 2022–2023 Ford Maverick.
The front lift uses strut spacers and the rear uses coil spring spacers. The added height allows larger tires and gives an adventurous look, and the kit also suits a vehicle driven mostly on the street.
Key features
- 1 inch front lift with strut spacers
- 3/4 inch rear lift with coil spring spacers
- Zinc plated steel spacers
- Made in the USA, per 4 Wheel Parts
- Backed by a Limited Lifetime Warranty, per 4 Wheel Parts
Choosing a leveling kit
A leveling kit balances the front and rear ride height so the vehicle sits evenly. Strut spacers and coil spring spacers work differently, so the front and rear lift methods should be understood before installation. Consider how the truck will be used, since a kit that suits mostly street driving may feel different on rough trails.
Spacer kits add height without replacing the springs or struts, which keeps the original parts in service. Over time, check the spacers for corrosion, since zinc plating protects steel only as long as the surface stays intact. Recheck bolts on spacers and mounts after the first drives, and keep an eye on alignment and tire wear.
- Confirm the front and rear lift methods
- Check spacers for corrosion each season
- Plan alignment around both lift heights
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 62207K |
| Front lift height | 1 inch |
| Rear lift height | 3/4 inch |
| Front lift method | Strut spacers |
| Rear lift method | Coil spring spacers |
| Material | Steel |
| Finish | Zinc plated |
| Bump stops | None |
| Shock relocation bracket | Not applicable |
| Track bar drop | Not included |
| Warranty | Limited Lifetime |
Vehicle fitment
This kit is for the 2021–2026 Ford Bronco Sport and the 2022–2023 Ford Maverick.
Bronco Sport years before 2021 and Maverick years before 2022 are not covered by the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front uses strut spacers and the rear uses coil spring spacers, so this is a spacer install rather than a new spring set. Any change in height alters alignment and driveline angles, so have the alignment checked after installing the kit.
It has no bump stops and no shock relocation bracket, which does not apply to this kit. The track bar is not dropped, so track bar geometry stays as it is unless you add a drop separately. Plan alignment around both lifts.
What’s included
Front strut spacers and rear coil spring spacers, which are the lift methods named for this kit.
Not included: a track bar drop.
















