Overview
The Pro Comp Nitro leveling lift kit, part number 61183K, is a front kit with steel strut spacers for 2019–2021 Ram 1500 trucks. It gives a 2.25 inch front lift. Confirm the lift height before ordering.
Pro Comp designed the kit for the rear coil spring suspension of the 2019 Ram 1500 4WD. It is meant to remove the factory nose-down rake and make room for larger wheels and tires up to 35 inches, while keeping the factory steering geometry, which the brand says preserves handling and ride quality.
The kit suits trucks carrying front accessories such as snow plows, heavy-duty bumpers and winches. It has polyurethane bump stops and a black finish.
Key features
- Strut spacers keep factory steering geometry
- Front lift height listed at 2.25 inches
- Removes the factory nose-down rake
- Polyurethane bump stops included
- Steel spacers in a black finish
- Designed for larger wheels and tires up to 35 inches
Before you install a leveling kit
A leveling kit raises the front end to correct nose-down rake, which changes how the truck sits on its suspension. Strut spacers work on the front struts and leave the rear unchanged, so the front and rear heights may look uneven after installation. Many owners accept that difference, while others add a matching rear lift.
Installation affects other parts. Brake lines, wiring and front driveline angles can change, so check them once the front is raised. Front bump stops and braking behavior also deserve a look, especially if the truck carries a heavy accessory on the bumper.
- Check brake lines and wiring for slack after lifting
- Look at driveline angles on the front axle
- Re-check torque on strut fasteners after the first drive
- Inspect the front bump stops for wear before heavy loads
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 61183K |
| Position | Front |
| Front lift height | 2.25 inches |
| Lift method | Strut spacers |
| Spacer material | Steel |
| Type | Polyurethane bump stops |
| Bump stops | Included |
| Track bar drop | Not included |
| Shock relocation bracket | Not applicable |
| Finish | Black |
| Fitment | It is a direct fit for 2019–2021 Ram 1500 trucks. |
Vehicle fitment
It fits 2019–2021 Ram 1500 trucks across all trim levels, and it is designed for the 2019 Ram 1500 4WD rear coil spring suspension.
Earlier Ram 1500 generations and Ram 2500 and 3500 trucks are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit does not include a track bar drop. Get an alignment after installation, and check the driveline angles on a lifted front end.
What’s included
Front strut spacers and polyurethane bump stops. Not included: a track bar drop, which the kit does not include.






















