Select your vehicle

ReadyLift 2 Inch Front Leveling Kit – 66-1090

ReadyLift

$249.95In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 9:50 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 2-inch front coil spring spacers in black e-coated steel
  • For 1994–2013 Ram 2500 and 3500 and 1994–2001 Ram 1500 trucks
  • Front lift only, no bump stops
  • Part number 66-1090

Description

Overview

The ReadyLift 66-1090 is a 2-inch front coil spring spacer kit for the 1994–2001 Ram 1500 and the 1994–2013 Ram 2500 and 3500 trucks. The spacers are made of black e-coated steel, which ReadyLift says will not deteriorate or lose ride height over time.

The kit levels the front of the truck with the rear. It is limited to 4WD trucks, and to 2500 and 3500 models without a radius arm. The 2006–2009 Dodge Ram Mega Cab 4WD trucks are also covered.

Key features

  • 2-inch front lift from coil spring spacers
  • Black e-coated steel designed to resist deterioration
  • Front lift only
  • Maintains ride height over time.

Coil spring spacers and ride height

A coil spring spacer raises the front by sitting between the spring and its seat, so the spring rate stays the same while the height changes. Heavier trucks and loaded beds put more demand on the springs, so the ride height over time depends on the spring and the steel used for the spacer. Checking the ride height after a few weeks of normal use is a useful habit.

Raising the front changes the driveline angle and the steering geometry, so these should be inspected after the install. U-joints and CV joints can show vibration or wear when the angle is pushed too far. Shock length and brake hose routing also deserve a check at the new height.

  • Check ride height after the first few weeks
  • Inspect U-joints for vibration
  • Confirm brake hoses have enough slack

Specifications

Brand ReadyLift
Part number RDY66-1090
Type Front coil spring spacers
Front lift 2 inches
Rear lift Front lift only
Spacer material Steel, black e-coated
Finish Black
Bump stops None
Track bar drop Not included
Fitment type Direct fit

Vehicle fitment

It is a direct fit for the 1994–2001 Dodge Ram 1500, including the Base, LT, Laramie, SS/T 5.9L, ST, Sport and WS trims; the 1994–2010 Dodge Ram 2500, including the Base, Laramie, SLT, ST, SXT, Sport, TRX and TRX4 trims; the 1994–2010 Dodge Ram 3500, including the Base, Laramie, SLT, ST, SXT, Sport and TRX4 trims; the 2011–2013 Ram 2500, including the Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, SLT, ST and Tradesman trims; and the 2011–2013 Ram 3500, including the Big Horn, Laramie, Laramie Longhorn, Lone Star, SLT, ST and Tradesman trims.

The 2500 and 3500 fit is for 4WD trucks without a radius arm, and the 1500 fit is for 4WD trucks. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The spacers sit on the coil springs, which changes the front ride height. Check the alignment and the driveline angles after installation.

What’s included

Two front coil spring spacers and the mounting hardware.

Fitment

VehicleYearsTrims
Dodge Ram 15001994–2001Base, LT, Laramie, SS/T 5.9L, ST, Sport, WS
Dodge Ram 25001994–2010Base, Laramie, SLT, ST, SXT, Sport, TRX, TRX4
Dodge Ram 35001994–2010Base, Laramie, SLT, ST, SXT, Sport, TRX4
Ram 25002011–2013Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, SLT, ST, Tradesman
Ram 35002011–2013Big Horn, Laramie, Laramie Longhorn, Lone Star, SLT, ST, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 66-1090 fit a 2WD Ram 2500?

No. This kit is limited to 4WD trucks for the 2500 and 3500 models, without a radius arm. Confirm the drive type and rear suspension design before ordering.

What is the spacer made of?

Black e-coated steel. It is designed to resist deterioration and to keep ride height over time, which is why it suits front spacers.

Does the kit include bump stops?

No. The kit has no bump stops, and the track bar drop is not included. The track bar stays at its factory height after the 2-inch front lift.

Do coil spring spacers change the driveline angle?

Yes. Raising the front changes the driveline angle and the steering geometry, so check both after installation. Inspect the U-joints and CV joints for vibration, and look for wear on the spring seats over time.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon