Overview
The 4 Wheel Parts factory fender delete kit, part number 61769W, is a set of four black mounting plates for the 2-door Ford Bronco. The plates fill the fender pockets after the factory fenders are removed, for a narrower look.
It is for the 2021–2026 Ford Bronco. The kit is a set of four and is for both front and rear locations.
The fender delete plates are a set of four black parts for the front and rear fender pockets. Once the factory fenders are removed, the plates fill the openings so the body lines look narrower. The kit fits the 2021–2026 Ford Bronco.
Key features
- Set of four mounting plates
- Fills the fender pockets when the OE fenders are removed
- Front and rear locations
- Black finish
Before removing fenders
Removing factory fenders is the main work in a delete, so plan time for it and keep track of every bolt and clip. Look at the wiring and marker lights in the fender area before cutting or unbolting anything, since harnesses often run through these spaces. Relocate or secure any harness so it does not stretch or pinch.
Once the fenders are off, the plates fill the pockets and tidy the body lines. Check the plates for even gaps and proper seating before tightening. Recheck the fasteners after the first few drives, and inspect the body edges for chips or rust that may need touch-up while the area is open.
- Label bolts and clips as you remove them
- Check wiring and marker lights before cutting
- Test-fit plates for even gaps
- Recheck fasteners after the first drives
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 61769W |
| Quantity | Set of 4 |
| Location | Front and rear |
| Color | Black |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2021–2026 Ford Bronco in the 2-door body style. Confirm your vehicle’s year, model and trim before ordering.
This kit is for 2021–2026 Bronco models. The 4-door version is a separate part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit works after the factory fenders are removed, so the OE fenders must come off before the plates are fitted.


















