Overview
The Bushwacker Toyota FJ Cruiser Pocket Style fender flare set, part number 31922-02, is a paintable front and rear set that adds up to 1.50 inches of tire coverage from debris.
The flares are custom-designed for the Toyota FJ Cruiser and are intended to complement oversized tires and high-clearance lift kits. The original pocket style design uses recessed stainless steel bolts for a bolt-on look.
The OEM matte black finish is UV protected and can be painted to match or accent the body. The Dura-Flex 2000 material is made in the USA.
Installation needs only minimal drilling, and the set measures 41.5 inches.
The flares add tire coverage at the fender edge, which is the purpose of an extended flare on a truck with bigger tires.
The front and rear pairs carry separate part numbers, which makes it easy to match each pair to its location.
Key features
- Adds up to 1.50 inches of tire coverage from debris
- Installs easily with minimal drilling
- OEM matte black finish that is easy to paint
- 100% UV protected Dura-Flex 2000, no chalking
- Front pair part 31063-02 and rear pair part 31064-02
- Set listed at 41.5 inches
- Made in the USA with a limited lifetime warranty
Trail use and tire clearance
Extended flares matter most when the tires are larger than the stock size or when the suspension has been raised. The stock fender edge was not designed to cover a wide tire at full articulation, so debris, sand and water can be thrown toward the body and windows on every turn. A flare that projects past the tread helps keep that spray off the doors and lower panels, especially on a vehicle used on washboard or muddy trails.
When you choose a set, consider how the flares will sit alongside the tires you run. Measure the tire width and the gap between the tread and the fender lip, then decide whether a flare, a wider wheel or a lift is the better change. Painting the flares is simple, but use a primer suited to the material, and let the paint cure fully before the first wash.
- Check the front and rear pairs against the part numbers before opening the box
- Tighten the mounting hardware after the first few drives
- Look for cracked or loose edges after rough trail runs
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 31922-02 |
| UPC | 90689110756 |
| Style | Pocket style |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Tire coverage | Up to 1.50 inches |
| Set size | 41.5 inches |
| Location | Front and rear |
| Front pair | Part 31063-02 |
| Rear pair | Part 31064-02 |
| Warranty | Limited lifetime |
| Origin | Made in the USA |
Vehicle fitment
Confirm fit for your FJ Cruiser’s model year and trim before ordering.
Installation notes
The set needs only minimal drilling. The OEM matte black finish can be painted for a custom look.
What’s included
A front pair (part 31063-02) and a rear pair (part 31064-02), sold together as one set of 41.5 inches.









