Overview
The Bushwacker 30002-07 is a cut-out rear fender flare pair for the Toyota Land Cruiser FJ-40. Each set is designed for the specific vehicle to maximize off-road wheel travel and keep adequate tire coverage, and this pair adds up to 1.5 in. of coverage against debris. Confirm the model year before ordering, since the cut lines are model-specific.
Cut-out flares require cutting body sheet metal to reach full articulation and coverage for oversized tires. The custom design gives a smoother appearance and added strength, and stainless steel hardware is used for the bolt-on installation. The Dura-Flex 2000 TPO is UV protected against chalking, and the OEM matte black finish can be painted.
Key features
- Adds up to 1.5 in. of tire coverage against debris
- Sheet metal removal maximizes wheel articulation
- Bolt-on installation with stainless steel hardware
- OEM matte black finish that can be painted
- Dura-Flex 2000 TPO, 100% UV protected
- Made in the USA, with a Limited Lifetime Warranty
Rear flares and suspension height
Rear flares cover the rear wheel opening and give room for wider tires and more axle movement. Because the rear of a Land Cruiser carries the axle and leaf or coil springs, the flare must clear the suspension at full compression as well as at ride height.
When cutting the rear body, watch for the fuel tank, brake lines and the spare tire mount. Take time to check clearance with the tire on, and recheck after any suspension change, since added height changes how much room is left.
Rear flares are easy to dent in trail use. Rinsing mud from the inner lip and checking the bolts after rough trips keeps the flares secure and helps spot damage early.
- Check clearance at full suspension compression
- Look for fuel and brake lines before cutting
- Recheck fit after any suspension change
- Rinse mud from the inner lip after trail use
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 30002-07 |
| UPC | 90689100481 |
| Vehicle | Toyota Land Cruiser FJ-40 (model years not stated) |
| Position | Rear |
| Sold as | Pair |
| Tire coverage | Up to 1.5 in. |
| Style | Cut-out, sheet metal removed |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000 TPO, 100% UV protected |
| Hardware | Stainless steel |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
These rear flares are made for the Toyota Land Cruiser FJ-40. Model years vary by cut line, so match your Land Cruiser’s year and body before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting body sheet metal to the cut lines for the specific model. Bushwacker refers to its installation guide for those details, so read it before making any cuts.
What’s included
A pair of rear cut-out fender flares with stainless steel hardware.









