Select your vehicle

Bushwacker Ford F-150 Max Coverage Fender Flare Set in Magnetic (Paintable) – 20935-6A

Bushwacker

Shop Bushwacker Fender Flares on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Magnetic Max Coverage fender flare set, part number 20935-6A
  • Magnetic paint code J7, set of four
  • 1.5 inches of width/coverage, front and rear
  • Installs easily with no drilling required
  • Made in the USA with a Limited Lifetime Warranty

Description

Overview

The Bushwacker Ford F-150 Max Coverage Fender Flare Set in Magnetic, part number 20935-6A, is four flares in the Magnetic finish, paint code J7, made for the Ford F-150. Confirm fit for your vehicle’s year, model and trim before ordering.

The flares are made in the USA from thick, warp-resistant Dura-Flex 2000 that is 100% UV protected, so the finish resists chalking. Installation is bolt-on with no drilling, and the flares can be painted for a custom look.

The listed width/coverage is 1.5 inches at both the front and rear positions.

The four flares are sized for both the front and rear positions, with the same 1.5-inch coverage at each end. They share one Magnetic finish and paint code J7, so the color matches across the truck.

Key features

  • Magnetic finish, paint code J7
  • 1.5 inches of width/coverage front and rear
  • Installs easily with no drilling required
  • 100% UV protected Dura-Flex 2000
  • Made in the USA

Paint and finish care

The Magnetic finish is part of the exterior look, so keep it clean with regular washing. Road grime and salt collect along the lower edge of a flare, so rinse that area when you wash the rest of the truck. A soft sponge and mild soap are enough for routine care.

Painted flares need a slower approach. Let fresh paint cure fully before waxing, and avoid abrasive pads that can dull the surface. Check the paint edges after the first season, since chips at the edges can let moisture reach the mounting area. Matching touch-up paint is easier to apply when the original finish is clean and dry.

  • Rinse the lower edges after off-road trips
  • Use a mild soap and a soft sponge
  • Touch up chips before they spread

Specifications

Brand Bushwacker
Part number 20935-6A
UPC 90689119117
Quantity Set of 4
Position Front and rear
Width/coverage 1.5 in
Color Magnetic (paint code J7)
Material Dura-Flex 2000
Warranty Limited Lifetime

Vehicle fitment

It is designed for the Ford F-150 and Ford Super Duty.

Confirm your vehicle’s year, model and trim before ordering, and check the flare size against your wheel and tire setup.

What’s included

A set of four Max Coverage fender flares in Magnetic.

SKU: B/W20935-6A Category:

Specification

Shipping weight 23.90 lbs
Package dimensions 49.00 × 36.00 × 12.00 in
brands

Questions & Answers

Does part 20935-6A fit the F-150?

Yes, it is made for the Ford F-150. Before installing, confirm the year, model and trim of your truck so the flares match your vehicle.

What is the paint code for Magnetic?

The paint code is J7. The flares are paintable as well, so the Magnetic finish can be replaced with a body-matched paint color if you prefer.

Does this set require drilling?

No. The flares install without drilling, and the Dura-Flex 2000 material is 100% UV protected, which helps keep the finish from chalking.

Can painted flares be cleaned the same way as the body?

Yes, with mild soap and water. Avoid strong solvents and abrasive pads on fresh paint, and let the paint cure before washing hard. Wax or sealant can be applied to painted flares the same way it is used on the rest of the truck.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Bushwacker Fender Flares on Amazon