UTV Parts & Accessories
Showing 277–288 of 399 resultsSorted by popularity
-
UTV Radius Rods
Cognito Motorsports OE Replacement Adjustable Upper Straight Radius Rod Kit – 360-90397
UTV Radius RodsCognito Motorsports OE Replacement Adjustable Upper Straight Radius Rod Kit – 360-90397
- Adjustable upper straight radius rod with an OE replacement design
- Chromoly tubing and rod ends
- Fits 2014–2017 RZR XP 1000 and XP 4 1000, plus 2016 Turbo models
- Cognito strongly recommends the radius rod cage if not already installed
- Part number 360-90397
SKU: COG360-90397 -
-
-
UTV Engine Accessories
Cognito Motorsports Extreme Duty Engine and Transmission Mount Kit – 360-P0720
UTV Engine AccessoriesCognito Motorsports Extreme Duty Engine and Transmission Mount Kit – 360-P0720
- Cognito Motorsports extreme duty engine and transmission mount kit, part number 360-P0720
- Replaces the engine mount tube, engine mounts and transmission mount
- Chromoly engine mount tube and CNC machined billet mounts
- Heavy-duty isolators; 1/2-inch cross-drilled tube bolts with safety wire
SKU: COG360-P0720 -
UTV Control Arms
Cognito Motorsports Camber Adjustable OE Replacement Front Lower Control Arms – 370-90742
UTV Control ArmsCognito Motorsports Camber Adjustable OE Replacement Front Lower Control Arms – 370-90742
- Camber adjustable front lower control arms, Cognito Motorsports
- Part number COG370-90742, direct OE replacement design
- Uniball rod end with supplied shims for fine camber tuning
- Fits 2017–2021 Can-Am Maverick X3 and X3 Max
SKU: COG370-90742 -
UTV Roofs, Windshields and Cage Accessories
CageWrx Jack and Mount Passenger Side Mount – XP1KJACKPASS
UTV Roofs, Windshields and Cage AccessoriesCageWrx Jack and Mount Passenger Side Mount – XP1KJACKPASS
- Passenger side mount for a 1,500-pound scissor jack, part XP1KJACKPASS
- Powder coated black base plate with a quick pin disconnect
- All mounting hardware and a 19 MM coupling nut included
- Fits 2014–2016 Polaris RZR XP 1000 models
SKU: CAGXP1KJACKPASS -
-
-
UTV LED Whips
Buggy Whip 6′ Red LED Whip, Quick Release – BWLED6RQ
- Buggy Whip 6 ft red LED whip with quick release, part number BWLED6RQ
- Must be used with the QRL03 mount
- Locking hitch pin lets the whip be installed and removed quickly
- 100% 316 stainless steel base, molybdenum alloy
- Universal fit: no vehicle year, make or model is named
SKU: BUGBWLED6RQ -
UTV LED Whips
Buggy Whip 6′ Blue LED Whip, Threaded – BWLED6BT
- Buggy Whip 6 ft blue LED whip with a threaded base, part number BUGBWLED6BT
- Universal fit: no vehicle year, make or model is named
- Threaded base that suits the QM2 mount, which is optional
- 100% 316 stainless steel base, molybdenum alloy
- DFARS – AMA – 5648 certification
SKU: BUGBWLED6BT -
UTV LED Whips
Buggy Whip 6′ Amber LED Whip, Threaded – BWLED6AT
- Buggy Whip 6 ft amber LED whip with a threaded base, part number BUGBWLED6AT
- Universal fit: not built for one UTV model
- Threads onto the QM2 mount by hand or runs without it
- Base is 100% 316 stainless steel with a molybdenum alloy
- Made in the United States, certifications DFARS – AMA – 5648
SKU: BUGBWLED6AT -
How UTV parts differ from truck parts
Side-by-sides are built around narrow, light chassis with short-travel or long-travel suspension, and parts are rarely interchangeable between brands. Bolt patterns are often 4 on 136, 4 on 156 or 4 on 110, not the truck patterns you may be used to, and axle and cage designs vary by model. Always search by exact model name and year, since a trim or model-year change can alter mounting points.
Choosing by upgrade type
- Wheels and tires: confirm bolt pattern, offset and tire diameter against fender clearance and the machine's gearing.
- Armor and skid plates: look at material, such as aluminum or UHMW plastic, and whether the plate covers the A-arms, belly or frame.
- Cages, bumpers-bumpers-tire-carriers-winch-mounts-2 and roofs: check tube diameter, wall thickness and mounting method.
- Seats and interior: harness points, seat rails and bolt-in mounting vary by chassis.
- Lighting and whips: confirm the wattage your electrical system can supply.
Protection first
Terrain damage on a UTV tends to fall on the belly pan, A-arms and CV boots, so armor is a sensible first upgrade for rocky or brushy trails. A heavier cage or bumper adds weight high on the chassis, which affects handling, so keep additions in proportion to what the machine was designed for.
Suspension and drivetrain changes
Taller tires, wider stance kits and longer-travel suspension all change axle angles. CV axles have limits on operating angle and plunge, so a wheel or tire change should match the other parts. Larger tires also raise load on the clutch and belt. Where a part affects steering, brakes or suspension, have it installed by someone who knows your platform and torque bolts to the manufacturer's specifications.
Fitment and local rules
Use the product page to read features, part numbers and the listed vehicle fitment, then verify against the manufacturer's information. Rules for lighting, flags, spark arresters and street use differ by state and by the land you ride on, so check local regulations before you install and ride. Keep a record of part numbers and torque values for any changes, which makes later service and troubleshooting much easier, and recheck fasteners after the first few rides because new hardware can settle.
Maintenance and inspection
Side-by-sides take a beating from mud, dust and water, so inspect new parts as part of regular service. Check fasteners on skid plates, cages and bumpers-bumpers-tire-carriers-winch-mounts-2 after the first rides and again after rough trips, since vibration loosens bolts. Look at plastic and aluminum armor for cracks, and wash packed mud from around suspension arms and axle boots. Keep an eye on harnesses and light wiring, which can chafe on sharp edges. If you add accessories that draw power, such as lights or a stereo, confirm the machine's charging system can supply them, and fuse each circuit. Keep records of the accessories you add, because they affect weight, handling and the way the machine should be serviced.
Weight is worth thinking about before you stack accessories. Heavy roofs, bumpers-bumpers-tire-carriers-winch-mounts-2, winches and cargo racks raise the center of gravity and add load to springs and shocks, so spring rate and shock valving may need review if you carry a lot of gear.
Popular UTV Parts & Accessories brands
- Pro Armor (51)
- Assault Industries (48)
- Method Race Wheels (33)
- Axia Alloys (29)
- PRP Seats (19)
- PCI Race Radios (17)
- Gorilla Whips (14)
- Energy Suspension (14)
- High Lifter Products (14)
- Buggy Whip (12)
- FUEL Off-Road (11)
- Super Swamper Tires (9)
Shop UTV Parts & Accessories by type
- UTV Tires & Wheels (94)
- UTV Cages, Bumpers & Armor (56)
- UTV Exterior Accessories (54)
- UTV Suspension & Axles (49)
- UTV Interior Accessories (39)
- UTV Lighting & Whips (44)
- UTV Helmets & Communication (21)
- UTV Performance (19)
- UTV Seats & Harnesses (13)
- UTV Audio & Speakers (8)
- UTV/ATV Winches & Towing (2)
UTV Parts & Accessories FAQ
Are UTV parts interchangeable between brands?
Usually not. Chassis dimensions, bolt patterns, suspension mounts and axle designs differ between makers and often between model years. Look for parts listed for your exact make, model and year, and check the manufacturer's specifications.
What is the most useful first UTV upgrade?
It depends on how you ride. For rocky or wooded trails, skid plates and A-arm guards protect the parts most likely to be damaged. For general trail use, many owners start with tires or seats. Match upgrades to the terrain.
Do bigger tires hurt a UTV?
They can. Larger or heavier tires raise load on the drivetrain, effectively change gearing, and can stress the belt and CV axles. Stay near the size recommended for your model and check fender clearance at full suspension travel.







