Overview
The XP1KJACKPASS is a passenger side mount for a 1,500-pound scissor jack, part number XP1KJACKPASS. It is for 2014–2016 Polaris RZR XP 1000 models. It bolts to its own base plate as a simple tire jack solution.
The base plate is powder coated black, and the jack connects with a quick pin disconnect for easy removal. All mounting hardware is included. Confirm the mounting side for your build before installing.
Key features
- Rated for a 1,500-pound scissor jack
- Quick pin disconnect for removing the jack
- Powder coated black base plate
- All mounting hardware included
- 19 MM coupling nut for raising and lowering with an impact gun
Checking the mount before trails
A jack mount carries the load of a scissor jack on rough ground, so the base plate and pin deserve a check before each trip. Confirm the mount is tight to the base plate and the pin is fully seated. Recheck the coupling nut and pin after the first rough outing, since trail vibration can loosen parts.
A scissor jack is only useful if the threads and coupling are in good shape. Keep the threads free of dirt and store the jack so the pin is protected from bending. If the base plate shows cracks or the powder coat has chipped to bare metal, clean and address it promptly to limit corrosion.
- Check the pin and base plate before each trip
- Clean dirt from the jack threads
- Inspect the coupling nut for wear
Specifications
| Brand | CageWrx |
|---|---|
| Part number | XP1KJACKPASS |
| Jack rating | 1,500 pounds |
| Jack type | Scissor |
| Mount position | Passenger side (title); driver side rear bed (description) |
| Base plate finish | Powder coated black |
| Disconnect | Quick pin |
| Coupling nut | 19 MM, included |
Vehicle fitment
It is for 2014–2016 Polaris RZR XP 1000 models. Confirm fit for your vehicle’s year, model and trim before ordering.
The mount is for the XP 1000 from 2014 to 2016 only.
Installation notes
The 19 MM coupling nut can be welded to the end of the jack. With it welded on, an impact gun with a 19 MM socket can raise and lower the jack. Welding is a separate step.
What’s included
The base plate and mounting hardware, with the 19 MM coupling nut and quick pin disconnect.
Not included: Check the package contents against your installation before starting to confirm whether the scissor jack is included.









