Transmission Parts
Showing 181–192 of 278 resultsSorted by popularity
-
Manual Trans Synchro Ring
Crown Automotive AX15 3rd
- AX15 3rd, 4th and 5th gear brass synchronizer ring, part 83506253
- Application limited to transmissions before serial #00705124
- Fits 1989–1999 Cherokee XJ, 1989–1992 Comanche and 1997 Wrangler TJ Sport
- Three alignment notches and 33 teeth
SKU: CRO83506253 -
Manual Trans Synchro Ring
Crown Automotive AX15 1st and 2nd Gear Synchronizer Ring – 83506252
- AX15 1st and 2nd gear brass synchronizer ring, part 83506252
- Fits 1989–1999 Cherokee XJ, 1989–1992 Comanche, 1993–1994 Grand Cherokee ZJ and 1988–1995 Wrangler YJ
- Quantity two required; 4.0L 6 cylinder engine
- Three alignment notches, 36 teeth, 3/8 inch thick
SKU: CRO83506252 -
Manual Trans Synchro Key Plate
Crown Automotive AX15 3rd and 4th Synchronizer Plate – 83506251
- AX15 3rd and 4th gear synchronizer plate, part number 83506251
- Quantity three required
- Fits 1989-1999 Jeep Cherokee (XJ) and 1993 Grand Cherokee (ZJ)
- Also fits 1997 Wrangler (TJ) and 1988-1995 Wrangler (YJ), UPC 848399026801
SKU: CRO83506251 -
Manual Trans Synchro Key Plate
Crown Automotive AX151st and 2nd Synchronizer Plate – 83506250
- AX15 1st and 2nd synchronizer plate, part number 83506250
- Quantity three required
- Fits 1989–1999 Jeep Cherokee (XJ) and 1993 Grand Cherokee (ZJ)
- Also fits 1997 Wrangler (TJ) and 1988–1995 Wrangler (YJ), UPC 848399026795
SKU: CRO83506250 -
-
Manual Trans Synchro Hub
Crown Automotive AX15 3rd and 4th Synchronizer Hub – 83506248
- AX15 3rd and 4th synchronizer hub, part number 83506248
- Fits 1989–1999 Jeep Cherokee (XJ) and 1993 Grand Cherokee (ZJ)
- Also fits 1997 Wrangler (TJ) and 1988–1995 Wrangler (YJ)
- UPC 848399026771, direct fit
SKU: CRO83506248 -
Manual Trans Input Shaft Snap Ring Set
Crown Automotive Input Shaft Snap Ring – 83506214
- Input shaft snap ring for the Crown Automotive AX15 manual transmission
- Part number 83506214, UPC 848399026726
- Listed size: 2.15mm x 37.50mm inner diameter
- Fits 1988–1998 Jeep Cherokee (XJ), 1988–1995 Wrangler (YJ), 1997–1999 Wrangler (TJ) and others
SKU: CRO83506214 -
Manual Trans Input Shaft Bearing
Crown Automotive AX15 Needle Bearing for Input Shaft – 83506078
- Rear-position AX15 needle bearing for the input shaft
- Rear-position needle bearing for Jeep Cherokee XJ, Grand Cherokee ZJ, Wrangler TJ and YJ
- Crown part number 83506078, UPC 848399026696
SKU: CRO83506078 -
Manual Trans Input Shaft Bearing
Crown Automotive AX15 Main Drive Gear Bearing – 83506074
- Crown Automotive AX15 main drive gear bearing, part 83506074
- Front position, direct fit replacement
- Fitment list: 1989 to 1999 Cherokee XJ, 1993 Grand Cherokee ZJ, 1997 Wrangler TJ Sport, 1988 to 1995 Wrangler YJ
- UPC 848399026658
SKU: CRO83506074 -
-
-
Manual Trans Output Shaft Seal Retainer
Crown Automotive AX4/5 AX15 Rear Adapter Seal – 83503108
- Crown Automotive rear adapter seal, part number 83503108
- Designed for AX4, AX5 and AX15 transmissions
- Fitment list covers 1988–1995 Jeep Wrangler YJ and 1997–2002 Jeep Wrangler TJ
- UPC 848399025194
SKU: CRO83503108
What you can find here
This category spans the hardware around a transmission as well as the parts inside it. External items include transmission mounts, crossmembers, drop brackets and torque arm bushings. Service items include gaskets, pans, shift cover seals, shift knobs and boots. Internal parts for manual gearboxes such as the AX15 and T14 include gears, synchronizer hubs and blocking rings, and adapters let a transmission connect to a transfer case or different engine.
Mounts, crossmembers and lift-related parts
A worn mount lets the transmission move and can cause clunks, vibration and driveline strain. After a lift, drivetrain angles change, and drop brackets or a modified crossmember lower the transmission to restore transfer case and driveshaft angles. Polyurethane mounts such as Prothane parts resist wear but are firmer than rubber, which can raise noise and vibration.
Deep pans and fluid
A deep-sump pan holds more fluid and adds cooling capacity, which can help when towing, running large tires or climbing at low speeds. Listings name specific automatics, such as the 42RE, 68RFE, 727, 4L60E and E40D/4R100, so match the transmission model exactly. Change fluid with the type specified by the manufacturer, since mixing or using the wrong fluid can damage clutches, and replace the filter and gasket with a pan swap.
- Identify the transmission model from the tag or pan shape.
- Check whether a pan requires a different filter or longer bolts.
- Fill to the specified level using the correct procedure and temperature.
Adapters and manual parts
Adapters connect transmissions to transfer cases or engines that were not originally paired, and need to be matched by model and spline specifications. For internal manual parts, a rebuild requires precision and special tools, and many owners rely on a transmission shop.
Support the transmission with a jack before removing any mount or crossmember, torque fasteners to specification, and confirm fitment for your exact year, make, model and transmission before ordering.
Keep a record of which transmission model and fluid you have, since the information helps when ordering any future parts. After servicing, check for leaks at the pan gasket and the mounts, and monitor the temperature if you tow.
Materials, construction and common pairings
Transmission pans are stamped steel or cast aluminum, and deep-sump versions often include fins to help cool fluid and a drain plug for easier service. Gaskets may be cork, rubber or composite, and the right type depends on the pan and the transmission maker. Mounts combine steel brackets with rubber or polyurethane, and crossmembers are steel tube or plate. Gears and synchronizers are heat-treated steel with brass or composite synchro rings that wear gradually.
Typical pairings include a pan with a filter and gasket, a mount with new crossmember bolts, a shift boot with a new shift knob, and an adapter with a matching transfer case and driveshaft. If you change the transmission mount height, check the driveshaft angles too.
Confirming fitment
The most reliable method is to identify the transmission by its tag or casting numbers and match it to the part listing. Count the pan bolts, compare pan shape, and measure the mount bolt spacing. Adapters depend on bellhousing patterns and spline counts, so these must be verified for your exact engine and transfer case.
Popular Transmission Parts brands
- Crown Automotive (136)
- Omix-Ada (60)
- Jeep (19)
- Drake (11)
- Pro Comp Suspension (10)
- Mag-Hytec (8)
- B&M (6)
- Rugged Ridge (6)
- Energy Suspension (6)
- Daystar (5)
- Prothane Motion Control (4)
- Advance Adapters (4)
Shop Transmission Parts by type
- Transmission Mount (27)
- CJ T170 Series Transmissions (11)
- Transmission Drop Bracket (7)
- Transmission Crossmember (4)
- Transmission Adapters (4)
- CJ T4 Transmission (4)
- Transmission Torque Arm Bushing (2)
- CJ T5 Transmission (1)
- Liberty NV-3550 Transmission (1)
- Transmission Parts - Automatic (17)
- Manual Transmission Parts (198)
Transmission Parts FAQ
What does a deep transmission pan do?
It holds extra fluid and has more surface area, which helps keep temperatures down in towing or heavy off-road use. It must match your transmission model and may need a specific filter.
How do I know my transmission mount is worn?
Common signs are clunking when shifting between drive and reverse, vibration, and visible cracks or separation in the rubber. The transmission may also sit lower or at an angle.
Why would I need a transmission drop bracket?
After a lift, the angle between transmission and transfer case or driveshaft may become steep. A drop bracket or crossmember lowers the transmission and helps restore proper angles.
Can I use any fluid in my automatic?
No. Different transmissions need specific fluids, and the wrong type can damage clutches and seals. Use the type listed in the owner's manual or the manufacturer's specifications.











