Select your vehicle

Crown Automotive Input Shaft Snap Ring – 83506214

Crown Automotive

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Input shaft snap ring for the Crown Automotive AX15 manual transmission
  • Part number 83506214, UPC 848399026726
  • Listed size: 2.15mm x 37.50mm inner diameter
  • Fits 1988–1998 Jeep Cherokee (XJ), 1988–1995 Wrangler (YJ), 1997–1999 Wrangler (TJ) and others

Description

Overview

The Crown Automotive 83506214 is a small input shaft snap ring that holds the bearing to the input shaft of the AX15 manual transmission. It is listed at 2.15mm x 37.50mm inner diameter.

The ring fits the 1992–1999 Dodge Dakota, the 1988–1998 Jeep Cherokee (XJ), the 1988–1992 Jeep Comanche, the 1997–1999 Jeep Wrangler (TJ) and the 1988–1995 Jeep Wrangler (YJ).

Key features

  • Holds the bearing to the input shaft on AX15 transmissions
  • Small snap ring design sold under Crown Automotive part number 83506214
  • Listed inner diameter of 2.15mm x 37.50mm
  • Crown Automotive UPC 848399026726 for matching

Replacing the snap ring

The input shaft bearing relies on the snap ring to stay in its groove under load. When the ring is worn, bent or sprung, the bearing can shift, which may cause noise, vibration or gear engagement problems. Because the ring is small, it is easy to overlook during a clutch or transmission service, so it is worth inspecting whenever the input shaft is opened.

During reassembly, seat the ring fully in the groove and confirm it sits flat all the way around. A partly seated ring can work loose over time. Use a clean groove and replace any ring that shows deformation, since reusing a stretched ring can allow the bearing to move.

  • Inspect the groove for wear or burrs
  • Replace rings that show bends or deformation
  • Confirm the ring sits flat and fully seated
  • Check the bearing for play after reassembly

Specifications

Brand Crown Automotive
Part number 83506214
UPC 848399026726
Transmission AX15 manual
Size 2.15mm x 37.50mm inner diameter
Function Holds bearing to input shaft
Fitment type Direct fit

Vehicle fitment

The fitment covers the 1992–1999 Dodge Dakota, the 1988–1998 Jeep Cherokee (XJ), the 1988–1992 Jeep Comanche, the 1997–1999 Jeep Wrangler (TJ) and the 1988–1995 Jeep Wrangler (YJ), with trims for each.

The Jeep Grand Cherokee and Wagoneer are not on this list, and the Wrangler TJ years after 1999 are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because this ring holds the bearing in place, check that it seats fully in its groove before the input shaft is reassembled.

What’s included

Check the package contents against your installation before starting.

SKU: CRO83506214 Category:

Specification

Shipping weight 0.10 lbs
Package dimensions 1.80 × 1.80 × 0.10 in
brands

Fitment

VehicleYearsTrims
Dodge Dakota1992–1999Base, LE, R/T, S, SLT, Sport, WS
Jeep Cherokee (XJ)1988–1998Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport
Jeep Comanche1988–1992Base, Chief, Eliminator, Laredo, Pioneer
Jeep Wrangler (TJ)1997–1999SE, Sahara, Sport
Jeep Wrangler (YJ)1988–1995Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Crown Automotive 83506214 fit a Jeep Cherokee XJ?

Yes, the 1988–1998 Jeep Cherokee (XJ) is on the manufacturer fitment list. The same list also includes the 1992–1999 Dodge Dakota and the Wrangler TJ and YJ.

What does the 83506214 snap ring hold in place?

The 83506214 is an input shaft snap ring. It holds the bearing to the input shaft in an AX15 manual transmission.

What are the dimensions of part 83506214?

The part is listed at 2.15mm x 37.50mm inner diameter. Crown Automotive gives no other dimensions, so measure the original ring to compare before buying a replacement.

Should the input shaft bearing be checked when replacing the snap ring?

Yes. Check the bearing for play, roughness or heat after reassembly. A bearing that moves in its seat can wear the ring groove and cause the ring to loosen again.

What are the signs that a worn snap ring is causing problems?

Common signs include noise from the transmission, vibration, or trouble engaging gears after the input shaft has been serviced. Inspect the ring and its groove first whenever these symptoms appear.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon