Mud flaps and splash guards shield the body, doors and rocker panels from road spray, stones and mud thrown by the tires. The group includes molded guards, no-drill vehicle-specific sets, universal flaps, hub-mounted systems and bracket kits from Husky Liners, Jeep, WeatherTech, Rugged Ridge and TeraFlex. Compare front and rear sets and finishes on each product page, then compare the listings below.
Mud Flaps
Showing 1–12 of 43 resultsSorted by popularity
-
Mud Flaps
Jeep Rear Rubber Splash Guards – 82202305
- Jeep rear splash guards, part number 82202305, sold as a pair
- Ultra-thick flat rubber guards with an imprinted Jeep logo and mounting hardware included
- Fits 1997–2006 Jeep Wrangler TJ and 2004–2006 Jeep Wrangler LJ Unlimited
- Installation requires cutting or drilling
SKU: JEP82202305 -
Mud Flaps
Husky Rear Mud Guards Mud Guards (Black) – 59511
- Form-fit rear mud guards for the 2019–2023 Ford Ranger (Lariat, XL, XLT)
- Black, impact resistant all-weather thermoplastic; part number HUS59511
- No cutting or drilling required for installation
- Maximum width for full tread coverage of single or dually factory tires
- Husky Shield film sits between the guard and the paint; lifetime guarantee; made in the USA
SKU: HUS59511 -
-
-
Mud Flaps
Husky Rear Mud Guards (Black) – 57791
- Fits 2007–2013 Chevrolet Silverado 1500 and 2007–2014 Silverado 2500 HD and 3500 HD trucks in listed trims
- Husky Liners part number HUS57791, rear mud guards in black
- Custom contoured with a paintable matte finish
- Cutting or drilling required; lifetime guarantee stated by the brand
SKU: HUS57791 -
Mud Flaps
Husky Rear Mud Guards (Black) – 57731
- Fits the 2007–2014 Chevrolet Tahoe (LS, LT) and GMC Yukon (SLE, SLT) in listed trims
- Husky Liners part number HUS57731, rear position, direct fit
- Custom molded black mud guards with a paintable matte finish
- Cutting or drilling required for installation
SKU: HUS57731 -
-
-
-
Why use mud flaps
Tires throw water, mud, gravel and road salt behind and beside the vehicle. Over time that spray chips paint on the lower body, rocker panels and doors, and it coats the vehicle behind you. Mud flaps and splash guards catch part of it. They are an inexpensive way to protect finishes and cut the debris sent at trailing vehicles, and many off-roaders add them before a muddy trip.
Styles in this category
- Molded vehicle-specific guards: shaped for a specific model and often use factory mounting holes. Front and rear sets are generally separate.
- No-drill designs: fasten with existing bolts or clips so the body is not drilled.
- Universal flaps and bracket kits: a flap with its own mounting hardware, useful for modified trucks or trailers.
- Hub-mounted systems: use the wheel hub and a bracket so the flap follows the tire on lifted or fender-trimmed rigs.
Choosing the right set
Match the guard to the vehicle's year, make and model, and check whether you have factory fender flares, running boards or aftermarket flares, because these change which style fits. Wide aftermarket tires and lifted suspension can push spray past a standard guard, so consider wider or taller coverage if you have modified the vehicle. Material matters as well. Rubber and thermoplastic guards flex and resist cracking in cold weather, while thin plastic can stiffen and break.
Off-road considerations
On rocky trails, long flaps can snag on rocks or reduce breakover and departure clearance, so some off-roaders remove them before technical terrain or choose short, flexible designs. Check clearance at full suspension travel and full steering lock so the flap does not rub the tire.
Installing
Most sets install with basic hand tools in less than an hour. Use the supplied hardware, avoid overtightening plastic mounts and apply sealant or touch-up paint where holes are drilled in sheet metal. Confirm fitment for your exact vehicle and trim before choosing.
Material and mounting quality make a noticeable difference over the years. Heavy-duty rubber and flexible polymer flaps hold their shape, resist cracking and flex rather than snap when they catch a rock. Stiff plastic guards give cleaner lines but can be more brittle in extremely cold weather. Look at the hardware as well. Stainless or coated fasteners resist rust, and spacers or backing plates spread the load on thin sheet metal.
Consider coverage in relation to your tires and fenders. A flap should reach close to the tire's width and hang low enough to catch spray, but not so low that it drags on a steep driveway or trail. Some owners fit a front and rear set for full protection, while others install only a rear set for towing or only a front set to protect the lower body. Wash behind the guards periodically, because mud packed behind them holds moisture against the paint and can lead to rust. Check fasteners after the first off-road trip.
Common mistakes are easy to avoid. Do not mount a guard so close to the tire that it rubs at full compression or full steering lock, and do not use short screws in thin sheet metal, where they can pull out. Check whether your vehicle has running boards, a trailer hitch or a spare tire carrier that changes the rear mounting location. Before drilling anything, hold the guard in place and mark the holes, then confirm the clearance with the wheels turned. If a guard flaps or vibrates at highway speed, tighten the hardware and add a washer rather than leaving it loose, since a loose flap wears the mounting holes and can tear free.
Popular Mud Flaps brands
- Husky Liners (26)
- Jeep (5)
- WeatherTech (3)
- Rugged Ridge (3)
- TeraFlex (2)
- Rock Tamers Mud flaps (2)
- ARB 4x4 Accessories (1)
- Warrior (1)
- Putco (1)
- Dee-Zee (1)
- Rock Tamers (1)
Mud Flaps FAQ
Do mud flaps hurt gas mileage or ground clearance?
The effect on mileage is negligible. They can reduce clearance behind the tires on rocky trails, so choose a short or flexible design if you drive technical terrain and remove them if they catch.
Do I need to drill holes to install mud flaps?
Not always. Many vehicle-specific sets use factory holes and clips, and are marketed as no-drill. Universal flaps may require drilling, so check the instructions before you start.
Are front and rear mud flaps listed as a set?
Often they are listed separately, so read each product page to see whether it is a front pair, a rear pair or both. Confirm the position and vehicle fitment.
What if I have fender flares or a lift?
Flares and lifts change the fit and spray pattern. Look for guards described as compatible with your flare setup, or universal or hub-mounted systems for modified rigs. Confirm with the manufacturer.











