Overview
The Husky Liners HUS59511 is a set of rear form-fit mud guards for the 2019–2023 Ford Ranger in the Lariat, XL and XLT trims. Rear mud guards, also called mud flaps, hang behind the tires to catch road spray and debris before it reaches the body panels and the vehicles behind you. They are made from impact resistant, all-weather thermoplastic.
The guards are shaped to match the fenders and are built to the maximum width for full tread coverage of single or dually factory tires. The design is form fit and requires no cutting or drilling for installation. The guards are styled to look like factory equipment and are made in the USA.
Key features
- Form-fit shape tailored to the Ford Ranger fenders
- No cutting or drilling required for installation
- Maximum width for full tread coverage of single or dually factory tires
- Impact resistant, all-weather thermoplastic construction
- Exclusive Husky Shield film sits between the mud guard and the vehicle’s paint
- Black finish styled to look like factory equipment
- Lifetime guarantee from Husky Liners
- Made in the USA
Keeping a Ranger clean and protected
Compact trucks like the Ranger work hard on gravel, mud and wet pavement, and rear guards keep much of that spray off the lower body and the vehicles following close behind. The edge of a form-fit guard is the part that sees the most contact, so it is the first place to check after rough trips.
A guard can trap moisture against the fender if mud packs behind it. Rinsing the area after off-road use and drying the edges helps prevent corrosion on the fender lip. Shops commonly recheck guard alignment when new tires are fitted, since a different tread can change the gap at the rear of the tire.
- Rinse mud from behind the guard after trail use
- Check edge contact after any tire size change
- Look for hairline cracks near the mounting holes
Specifications
| Brand | Husky Liners |
|---|---|
| Part number | HUS59511 |
| Product type | Rear mud guards (form fit) |
| Position | Rear |
| Color | Black |
| Material | Impact resistant, all-weather thermoplastic |
| Fitment type | Direct fit |
| Installation type | No cutting or drilling required |
| Tire coverage | Maximum width for single or dually factory tires |
| Warranty | Lifetime guarantee |
| Made in | USA |
Vehicle fitment
Husky Liners lists these rear mud guards for the 2019–2023 Ford Ranger in the Lariat, XL and XLT trims. Match your model year and trim against that range before installing.
Years before 2019 and after 2022, and Ranger trims not named in the list, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The guards mount to the fenders as supplied, with no cutting or drilling. The Husky Shield film is easy to install and sits between the guard and the paint. After mounting, check clearance between the guard and the tires at full steering lock, since a change in tire size can alter that clearance.
What’s included
Husky Liners describes one set of rear mud guards with the Husky Shield film as part of the set. No separate brackets or hardware are mentioned, so check the packaging for included parts.











