Overview
The Curt Manufacturing Class V Commercial Duty receiver hitch, part number CRT15804, is a heavy-duty rear receiver hitch for the 2020–2021 Ford F-350 Super Duty. It is built for towing skid steers, equipment, livestock trailers and large utility trailers, with ratings of 20,000 pounds gross trailer weight and 2,700 pounds tongue weight.
It is built for F-350 Super Duty trucks in the trims below. The receiver opening is either 2 inches x 2 inches or 2-1/2 inches, so confirm the opening before ordering.
Key features
- Steel welded into a powerful frame with an extra-large steel center section
- Grade-8 hardware used to mount the hitch
- Large safety chain loops for heavy-duty hooks and safety chains
- Steel collar welded into the receiver for added strength
- Tested to SAE J684 at a dedicated facility near Detroit, MI
- Two-part finish: a liquid A-coat bath, then a carbide black powder coat
- Weight distribution rating of 20,000 pounds WD and 2,700 pounds WDTW
Heavy towing checklist
A Class V commercial hitch is built for loads that stress the whole rear of a truck, so the hitch is only one part of the setup. The truck’s rear suspension, brakes, tires and tow mirrors all need to match the trailer. Skid steers, equipment and livestock trailers often have heavy or shifting loads, so the trailer’s tongue weight and its center of gravity should be checked before every trip, not just the first.
Care matters more with a heavy-duty hitch. Look over the welds, the receiver tube and the grade-8 bolts after the first few tows and at each service interval, and watch for cracking, bending or hardware that has backed off. Keep the receiver free of mud and road grime, and use a locking pin on every trip. If the receiver opening is in doubt, measure your accessory shank before buying sleeves or mounts.
- Match the ball mount and coupler to the trailer load
- Check grade-8 bolts at each service interval
- Confirm the receiver opening before buying sleeves
- Use a locking pin on every trip
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT15804 |
| Hitch class | Class V, Commercial Duty |
| Receiver size | 2 inches x 2 inches or 2-1/2 inches; confirm before ordering |
| Weight class | Class V |
| Gross trailer weight rating | 20,000 pounds |
| Tongue weight rating | 2,700 pounds |
| Weight distribution rating | 20,000 pounds WD; 2,700 pounds WDTW |
| Mount position | Rear |
| Fitment type | Direct fit |
| Roll pan compatibility | Not applicable (N/A) |
| Material | High-quality steel |
| Hardware | Grade-8 |
| Finish | A-coat base with carbide black powder coat |
| Testing | SAE J684 |
| Made in | USA, may include imported hardware |
| Warranty | Limited lifetime warranty |
Vehicle fitment
It fits the 2020–2021 Ford F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
F-450, F-550 and F-650 Super Duty models are not part of this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hitch mounts with grade-8 hardware and is a custom fit that requires no extensive modifications to the vehicle. Never exceed the lowest-rated towing component in the combination.
What’s included
Grade-8 hardware is used for mounting. No ball mount or other accessory comes with it, so plan to buy those separately.
Not included: Ball mounts, hitch tube covers and reducer sleeves. Curt offers reducer sleeves and tube covers separately.









