Overview
The Trail Gear 110019-1-KIT is a greasable shackle kit in the shackle reversal category. It has threaded zerk fittings for greasing, factory size 18mm bolts with crimp nuts, zinc plated plates and Polly bushings.
Lengths are measured from center of hole to center of hole. Stock shackles are 3.5 inches between holes, so check the hole-to-hole length of your existing shackle before ordering.
Key features
- Threaded zerk fittings for greasing
- Polly bushings included
- Zinc plated plates
- Factory size 18mm bolts with crimp nuts
Greasing and shackle upkeep
A greasable shackle lets you service the bushings without removing the shackle, which helps keep grit and water out of the joint. Grease the zerk fittings after each washing or trail run where water or mud reached the shackle. Clean the fitting first so dirt is not pushed into the bushing as you grease. Greasing is a quick check that also shows how the joint is holding up.
Shackles can also be the start of a leaf spring or suspension noise, so inspect them when you grease. Look for play, cracking around the plates and bolts that have loosened or rusted. Check that the crimp nuts remain tight and that the plates sit square before driving.
- Wipe zerk fittings before greasing
- Inspect plates for cracks
- Check bolt tightness and crimp nuts
- Watch for play at the bushing
Specifications
| Brand | Trail Gear |
|---|---|
| Product code | 110019-1-KIT |
| UPC | 70000621533 |
| Part type | Greasable shackle kit |
| Bolt size | 18mm factory size with crimp nuts |
| Plate finish | Zinc plated |
| Fitting | Threaded zerk |
| Bushings | Polly bushings |
| Stock shackle spacing | 3.5 inches between holes |
Vehicle fitment
It is a direct fit for the rear shackle location. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Threaded zerk fittings are part of the kit, so the bushings can be greased after fitting. Check the hole-to-hole length against your existing shackle before installing.
What’s included
The kit includes Polly bushings, threaded zerk fittings, zinc plated plates and factory size 18mm bolts with crimp nuts. Confirm the contents against your installation before fitting.








