Overview
The Trail Gear 110017-1-KIT is a narrow greasable shackle kit measuring 5.0 in. center of hole to center of hole. It is for the rear location and includes Polly bushings.
Each kit uses threaded zerk fittings for greasing, zinc plated plates and factory size 18mm bolts with crimp nuts. A standard shackle measures 3.5 inch between holes, so this kit is longer than standard.
Key features
- Greasable through threaded zerk fittings
- Polly bushings included
- Zinc plated plates
- Narrow kit, 5.0 in. center to center
Narrow kits and clearance
A narrow shackle kit changes how the spring sits, so clearance around the spring pack, frame and nearby hardware should be checked before the vehicle is driven. The kit’s length affects the angle of the spring at full travel, which can influence ride feel and the way the vehicle leans. Compare the new spacing against the existing shackle, not just against a number on a chart.
Greasable pivots need regular attention. Clean the threaded fittings, pump grease until fresh lubricant appears at the bushing edges, and wipe off the excess. Over time, bushings can split or flatten, and plates can bend if the shackle has been stressed. Inspect the pivots during routine service and after a hard landing, and replace worn components before they cause binding.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110017-1-KIT |
| UPC | 70000621531 |
| Kit type | Greasable shackle kit |
| Length | 5.0 in., center of hole to center of hole |
| Width | Narrow |
| Bolts | 18mm factory size, with crimp nuts |
| Plates | Zinc plated |
| Bushings | Polly |
| Lubrication | Threaded zerk fittings |
Vehicle fitment
Fitment is tagged Direct Fit at the rear location with no vehicle named. Compatibility is not confirmed for any make, model or year.
Compare your existing shackle spacing with the 5.0 in. kit length before fitting.
Installation notes
Grease the kit through its threaded zerk fittings once it is in place. Measure your current shackle spacing first, because this kit is 5.0 in. center to center.
What’s included
Polly bushings come with the kit, so look over the rest of the hardware before fitting.









