Suspension
Showing 5821–5832 of 7279 resultsSorted by popularity
-
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7112R04
- Bilstein 7100 Series reservoir shock, part number AK7112R04
- 2-inch shock body with gas charged monotube construction
- High-flow piston and Schrader valve with dividing piston
- Series travel options of 8, 10, 12 and 14 inches
- Universal fit listed; no vehicle years or models named
SKU: BILAK7112R04 -
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7112R01
- Bilstein AK7112R01 reservoir shock absorber from the 7100 Series
- Gas monotube with a 2 inch body and self-adjusting valving
- Owner rebuildable with a choice of valvings
- No vehicle named; fitment label reads universal
SKU: BILAK7112R01 -
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7110R04
- Bilstein 7100 Series reservoir shock absorber, part number AK7110R04
- Gas charged monotube design for off-road use
- Schrader valve with dividing piston
- Series travel options of 8, 10, 12 and 14 inches
- Vehicle years and models not named; product information lists universal fit
SKU: BILAK7110R04 -
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7110R01
- Bilstein AK7110R01, 7100 Series reservoir shock absorber
- Gas monotube design with a 2 inch body and Schrader valve
- Owner rebuildable with a choice of valvings
- Fitment must be confirmed by year, model and trim; the label reads universal fit only.
SKU: BILAK7110R01 -
Shock Absorbers
Bilstein 7100 Series Shock Absorber – AK7108S06
- Bilstein 7100 Series gas charged shock absorber, part number AK7108S06
- Monotube construction with Schrader valve fitting
- Series travel options of 8, 10, 12 and 14 inches
- Owner rebuildable design per product information
- No vehicle years or models named
SKU: BILAK7108S06 -
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7108R06
- Bilstein 7100 Series reservoir shock absorber, part number AK7108R06
- Gas charged monotube construction with a 2-inch shock body
- Remote reservoir version with Schrader valve
- Series available in 8, 10, 12 and 14 inch travel
- Vehicle fitment not named; product information lists universal fit
SKU: BILAK7108R06 -
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7108R02
- Bilstein AK7108R02 reservoir shock absorber from the 7100 Series
- Gas pressure monotube with a 2 inch body
- Self-adjusting deflecting disc valving and Schrader valve
- No vehicle is named; fitment label reads universal
SKU: BILAK7108R02 -
Suspension Leveling Kits
Bilstein B8 6112 Suspension Leveling Kit – 47-266711
- Bilstein B8 6112 front leveling kit, part 47-266711
- Fits 2005-2018 Nissan Frontier and 2005-2015 Nissan Xterra
- Front lift of 0 to 2.75 inches, depending on application
- Includes two 60mm shock absorbers, two coil springs and two billet aluminum spring seats
SKU: BIL47-266711 -
Suspension Leveling Kits
B8 6112 Series Suspension Kit
- Bilstein B8 6112 coilover leveling kit, part number 47-260337
- Front lift range of 0 to 2.75 in. set by spring seat groove
- Two 60MM shocks, cold wound coil springs and billet aluminum spring seats
- Fits 2000–2006 Toyota Tundra in Base, Limited and SR5 trims
- Zinc plated finish, no reservoir
SKU: BIL47-260337 -
-
-
Suspension Leveling Kits
B8 6112 Series Suspension Kit
- Bilstein B8 6112 coilover leveling kit, part number 47-243729
- Provides 0 to 2.75 in. of front lift depending on application
- Includes two 60mm shocks, two coil springs and two billet aluminum spring seats
- Fits 2000–2006 Toyota Tundra in Base, Limited and SR5 trims
- No reservoir; zinc plated finish
SKU: BIL47-243729
How the suspension parts relate
A 4x4 suspension is a system. Springs, whether coil or leaf, hold up the vehicle. Shocks control how fast those springs move. Control arms, track bars, and traction bars locate the axle. Bushings and sway bar links cushion and connect parts. When you change one element, such as lift height, other parts often need to change too, which is why complete lift kits exist alongside individual parts.
Where to begin
- Rough or floaty ride: start with shocks. Series like Rancho RS5000, Bilstein 5100, and Fox 2.0 differ in valving and design.
- More ground clearance and tire room: a lift kit or leveling kit, picked by lift height.
- Sagging or tired leaf springs: replace the springs with new leaf springs, plus bushings, shackles, and hardware.
- Clunks or looseness: check bushings, sway bar links, and track bar parts.
Specs to compare
For shocks, compare piston and rod diameter, twin tube versus monotube construction, valving, and reservoir options. For lift kits, compare lift height, shock inclusion, and the maximum tire size. For springs, compare leaf count, rate, and whether bushings are included. For bushings, note material, such as polyurethane or rubber, and size. Fitment notes such as front or rear, 2WD or 4WD, and year range matter as much as the specs.
Installation and safety
Suspension work involves heavy parts and stored spring energy, and it affects steering and braking. Use proper jack stands, follow the manufacturer torque specifications, and tighten bushing bolts with the vehicle at ride height. A professional alignment is needed after most changes, and a shop installation is a good idea if you are not experienced.
Confirming compatibility
Suspension parts are vehicle specific. Confirm fitment for your exact year, make, model, drive type, and cab or wheelbase, and check the manufacturer specifications on each product page. Lift height and tire size rules vary by state, so check local regulations.
Because suspension modifications interact, plan the whole setup rather than buying parts piecemeal. Decide on your tire size and lift height first, then select shocks, springs, and supporting parts that suit that target, and budget for the alignment and any driveline corrections that follow.
Maintenance and inspection
Suspension parts wear slowly, so inspect them on a schedule. Look for torn bushings, leaking shocks, cracked leaf spring eyes, loose U-bolts, and bent track bars. Check torque on U-bolts and control arm bolts after the first few hundred miles following any work, then at routine service. Grease any fittings that call for it. Keep mud and debris out of the spring packs, which can wear leaves and cause squeaks. Match both sides when replacing worn components, since mixing new and old shocks or springs gives uneven handling. Be careful with mixed brands in one system, as damping and spring rates are designed to complement each other, and keep records of what you installed. When in doubt about a part, the manufacturer's specifications and installation instructions are the final word on torque values and compatibility. Keep notes of what you changed and when.
Popular Suspension brands
- Pro Comp Suspension (1,873)
- Bilstein (638)
- Rancho (616)
- Skyjacker (534)
- Fabtech (533)
- Rubicon Express (513)
- Fox Racing Shox (349)
- ARB 4x4 Accessories (267)
- Daystar (210)
- Energy Suspension (205)
- Tuff Country (192)
- Rough Country (191)
Shop Suspension by type
- Shock Absorbers (3,453)
- Lift Kits (1,736)
- Suspension Leveling Kits (350)
- Leaf Spring (278)
- Suspension Block and U-Bolt Kit (153)
- Leaf Spring Bushings & Pads (142)
- Sway Bar Bushings & Brackets (134)
- Leaf Spring Shackle Kit (102)
- Shock Absorber Boot (76)
- Shock Absorber Bushing (67)
- Track Bar Bracket (62)
- Lift Kit-Suspension Component (54)
- Leaf Spring Shackle Bushing (53)
- Sway Bar Assemblies (50)
- Suspension Block (52)
- Long Arm Upgrade (45)
- Shackle Reversal Kits (36)
- Track Bar Bushings (34)
- Leveling Compressor Kits (34)
- Limiting Strap (34)
- Leaf Spring Bolt (23)
- Leaf Spring Hanger (22)
- Leaf Spring Plate (21)
- Master Bushing Kit (20)
- Traction Bar (18)
- Spindle (16)
- Shock Absorber Rebuild Kit (15)
- Shock Absorber Extension (15)
- Traction Bar Bracket (15)
- Rack & Pinion Bushing (12)
Suspension FAQ
What should I upgrade first on my suspension?
Shocks are a common first step because they improve control and comfort without changing height. If you want more clearance or bigger tires, a lift or leveling kit is the next step.
What is the difference between a lift kit and a leveling kit?
A lift kit raises the whole vehicle, often with new springs or components, while a leveling kit usually raises just the front to match the rear. Both change geometry, so alignment is needed.
How do I know if my shocks are worn?
Signs include a bouncy or floaty ride, nose dive under braking, leaking fluid, and uneven tire wear. Shocks wear gradually, so replace them in pairs on an axle and check them regularly for leaks.
Do I need new bushings with new springs?
Often yes, particularly with leaf springs. Worn bushings cause noise and sloppy handling, and replacing them while the parts are already apart saves a good deal of labor later.











