Overview
The Bilstein B8 6112 coilover leveling kit, part number 47-243729, provides 0 to 2.75 in. of front lift on 2000–2006 Toyota Tundra trucks, depending on application. It adds ground clearance, allows larger tires and increases wheel travel. It fits Base, Limited and SR5 trims.
The kit has two 60mm shock absorbers, two custom matched cold wound coil springs and two billet aluminum spring seats. Multiple snap-ring grooves in the body set different spring seat positions. The large 60mm digressive piston provides damping control for on-road and off-road use.
Key features
- 0 to 2.75 in. of front lift through multiple snap-ring grooves
- 60mm ID snap ring grooved coilover body
- Large 60mm digressive piston for damping control
- Custom matched cold wound coil springs
- Billet aluminum spring seats
- Zinc plated finish
Setting spring seat height
On a coilover leveling kit, the spring seat position controls how much the front rides up. Each groove in the body moves the seat by a set step, so changing grooves is the way to adjust the lift without swapping parts. Plan the height you want before you start, because moving the seat changes spring preload and the way the shock works through its travel.
After each change, measure ride height at the same points and compare the readings. Look at the front brake hoses and sway bar links for stretch or binding, and check that the spring sits square on the seat. If the vehicle carries a heavy load or tow hitch, recheck the setting after the first trips with that load.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 47-243729 |
| UPC | 651860777009 |
| Front lift | 0 to 2.75 in., depending on application |
| Body design | 60mm ID snap ring grooved (coilover) |
| Piston | 60mm digressive |
| Included | (2) 60mm shocks, (2) coil springs, (2) billet aluminum spring seats |
| Reservoir | No |
| Finish | Zinc plated |
| Position | Front |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2000–2006 Toyota Tundra trucks in Base, Limited and SR5 trims.
Tundra model years after 2006 and other Toyota trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the spring seat position using the snap-ring grooves in the body, then measure ride height to confirm the lift falls within the 0 to 2.75 in. range.
What’s included
Two 60mm shock absorbers, two coil springs and two billet aluminum spring seats.









