Overview
The Bilstein B8 6112 front leveling kit, part number 47-266711, is a spring and shock package for the front of 4WD Nissan Frontier and Nissan Xterra trucks. It fits 2005-2018 Frontier and 2005-2015 Xterra models.
The kit pairs two 60mm shock absorbers with two custom matched cold wound coil springs and two billet aluminum spring seats. Multiple snap-ring grooves on the shock body let you set the spring seat position for 0 to 2.75 inches of front lift, depending on the application. The 60mm digressive piston is designed to give damping control for on-road and off-road use.
Key features
- Front leveling for 4WD models
- Front lift of 0 to 2.75 inches depending on spring seat position
- 60mm shock absorbers with a digressive piston
- Custom matched cold wound coil springs
- Billet aluminum spring seats
- Snap-ring grooves for multiple spring seat positions
Front leveling and suspension balance
A front leveling kit raises the front to bring it closer to the rear height on a truck that sits low in front or carries a heavier rear load. Because the shocks and coil springs both change, the front suspension behaves differently under braking, steering and cornering, so the whole setup should be treated as one system.
Before installing, check the upper control arm bushings, ball joints and steering components, since these carry more load after the lift. Measure ride height at the front and rear before and after the kit goes in, and look for uneven tire wear during the first few weeks of driving.
- Inspect ball joints and tie rod ends
- Check brake hose length after lifting
- Replace worn front sway bar end links
- Re-check alignment after the first drive
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 47-266711 |
| UPC | 651860804910 |
| Model | B8 6112 leveling kit |
| Front lift | 0 to 2.75 inches, depending on application |
| Shock absorber size | 60mm |
| Position | Front |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005-2018 Nissan Frontier (LE, Nismo Off-Road, PRO-4X, SE, XE) and the 2005-2015 Nissan Xterra (Off-Road, PRO-4X, S, SE, X).
It is made for 4WD models, so confirm your truck is 4WD. Frontier years after 2018 and Xterra years after 2015 are not covered.
Installation notes
The kit contains both shocks and coil springs, so expect a full front suspension install rather than a simple swap. Use a spring compressor and jack stands when working on the front coil springs.
What’s included
Two 60mm shock absorbers, two custom matched cold wound coil springs and two billet aluminum spring seats.












