Electrical
Showing 85–96 of 128 resultsSorted by popularity
-
Battery & Battery Accessories
Rugged Ridge Dual Battery Tray (Black) – 11214.51
- Rugged Ridge dual battery tray, part number 11214.51, black powder coat finish
- Listed fitment: 1991–1995 Jeep Wrangler (YJ), Direct Fit
- Mounts two batteries in place of the factory single battery location
- No drill installation; mounting kit only, no wiring included
- UPC 804314175375
SKU: RUG11214.51 -
-
-
Performance Alternators & Starters
Powermaster Alternator (Polished) – 274011
- Powermaster polished street alternator, part 274011, 105 amperes
- One-wire wiring for a single connection
- Suited to trucks, hot rods, muscle cars and sport compacts
- Universal fit, not tied to a year, make or model
SKU: POW274011 -
Electrical Components
SPOD Hi-Amp Circuit Breaker – 580-HACP
- SPOD Hi-Amp Circuit Breaker, part 580-HACP
- Raises the protection limit to 80 amps, up from 50 amps on the standard breaker
- Duty Safe design for accessories that draw high current while running
- Universal fit, not tied to a particular vehicle
SKU: POD580-HACP -
Battery & Battery Accessories
Odyssey Batteries Battery Hold Down Kit (Polished aluminum) – HK-PC2150
Battery & Battery AccessoriesOdyssey Batteries Battery Hold Down Kit (Polished aluminum) – HK-PC2150
- Odyssey Batteries HK-PC2150 polished aluminum hold down kit for 2100 Series batteries
- Mounts at the top of the battery; universal fit.
- Aluminum metal type with a polished aluminum finish
SKU: ODYHK-PC2150 -
Battery & Battery Accessories
Odyssey Batteries Performance Series – 75/86-705
- Odyssey Batteries 75/86-705 12-volt Performance Series battery
- 708 cold cranking amps, 875 hot cranking amps, 760 marine cranking amps
- Limited 2-year full replacement warranty; universal fit per the manufacturer
SKU: ODY75/86-705 -
Battery & Battery Accessories
Odyssey Batteries Performance Series – 65-760
- Odyssey Batteries Performance Series 65-760 deep cycle battery
- Flat plates of 99.99% pure lead, built for heavy accessory loads
- Universal fit, so check case size and terminal layout.
- Marketed for commercial trucks and tractor trailers
- UPC 635241139556
SKU: ODY65-760 -
Battery & Battery Accessories
Odyssey Batteries Performance Series – 34R-790
- Odyssey Batteries Performance Series deep cycle battery, part number 34R-790
- Flat plates of 99.99% pure lead, not lead alloy
- Built for heavy onboard accessory loads and commercial truck use
- Universal fit; measure case size before installing
- UPC 635241139594
SKU: ODY34R-790 -
-
Performance Alternators & Starters
Powermaster High-Output Alternator (Natural) – 8002
- Bolt-in high-output replacement for 1963–1983 Chevrolet and GMC C/K trucks and Suburbans, plus select 1975–1983 Jeep models
- 100 amperes output (also written 100/70 amp)
- Slightly larger case fits factory brackets and uses the same belt
- One-Wire wiring, natural finish, part number 8002
SKU: POW8002
What this category covers
Accessories add electrical load. Winches, light bars, air compressors, fridges, and radios all draw power, and the stock charging system was not sized for them. This category brings together the components that supply, control, and monitor that power: batteries, higher-output alternators and starters, battery isolators, switch panels, gauges, and replacement wiring or switches.
You will also see vehicle-specific items such as Wrangler JK switch panels and A-pillar mounts alongside universal products.
Batteries and charging
- Battery type: AGM batteries resist vibration and do not spill, which suits off-road use.
- Ratings: Compare cold cranking amps, reserve capacity, group size, and terminal type (top post or side post).
- Alternators and starters: Higher-output alternators support heavy accessory loads, and high-torque starters help with large engines or tight compression.
- Isolators: A dual battery isolator charges an auxiliary battery without draining the starting battery.
Switches, gauges, and wiring
Switch panels centralize accessory control, and many accept rocker switches for lights, lockers, and compressors. Check amperage ratings, whether the panel is waterproof, and whether a controller is needed. Gauges add visibility into voltage and current, which is useful with dual batteries.
Use wire gauge and fuses sized for the load and length of the circuit, protect connections from moisture, and fuse near the power source. Undersized wiring is a fire risk.
Fit and installation
Battery group size and terminal layout must match your tray and cables, and alternators and starters are specific to engines. Disconnect the battery before working, follow the manufacturer's instructions, and confirm fitment for your exact year, make, and model. Complex wiring jobs, such as multi-battery systems, may be worth professional installation.
Planning your power budget
Before buying, add up what you plan to run. Note each device's amp draw and how long it runs with the engine off, and compare the total to your alternator output and battery capacity. A fridge, lights, and a compressor may be modest alone but add up together.
Plan for protection too: fuses or circuit breakers, a master disconnect, secure battery hold-downs, and clean, tight ground connections. Corroded terminals and loose grounds cause many electrical gremlins that people blame on parts. Keep a multimeter in the vehicle to check battery voltage, which is typically about 12.6 volts at rest on a healthy battery and higher with the engine running.
Several part types appear in this category and are worth distinguishing. Alternators supply power while the engine runs, starters crank the engine, and batteries store energy. Isolators and relays manage how those pieces share load. Switch panels and harnesses control accessories.
When buying batteries, check the date code, because batteries lose capacity during long storage. Keep terminals clean, use a battery tender if the vehicle sits for weeks, and secure the battery well, since vibration shortens life. When replacing an alternator, check the pulley type, mounting points, and connector, and consider upgrading cables if they are old or corroded.
Never work near a charged battery without eye protection. Remove metal jewelry, disconnect the negative terminal first, and keep sparks away from vented batteries, since they can release hydrogen.
Popular Electrical brands
- Odyssey Batteries (30)
- Powermaster (14)
- Crown Automotive (13)
- Savior Products (9)
- Redarc (8)
- Omix-Ada (7)
- Rugged Ridge (6)
- SPOD (6)
- Painless Wiring (5)
- Mean Green (4)
- Trail Gear (3)
- Advanced Accessory Concepts (3)
Shop Electrical by type
Electrical FAQ
Is an AGM battery better for off-roading?
AGM batteries are sealed, resist vibration, and tolerate tilted angles, which makes them a popular choice for trail use. They can cost more, and they need a charging system that suits their voltage requirements. Check the maker's guidance.
What does a battery isolator do?
It lets the alternator charge a second battery while keeping it separate from the starting battery. That way accessories can run the auxiliary battery down without leaving you unable to start the engine.
Do I need a high-output alternator?
Possibly, if you run a winch, large lights, and other heavy accessories together. Add up the continuous loads and compare them to your stock alternator's output. Confirm engine and fitment before choosing.
What wire gauge should I use?
It depends on the current and the length of the run. Use the device's rated amperage and the wire maker's chart, and fuse the circuit near the power source. When unsure, go thicker rather than thinner.










