Overview
The Rugged Ridge dual battery tray, part number 11214.51, is an upgrade mounting kit that holds two batteries in place of the factory single battery location on the 1991–1995 Jeep Wrangler (YJ). It is a Direct Fit upgrade for that vehicle.
Trail rigs often add a winch, air compressor, fog lights, driving lights, a spotlight, an electric fuel pump or a stereo amplifier, and each one adds strain to the electrical system. A winch in particular can draw large current for long periods. A second battery is the usual answer, and this tray is built to carry it, with black powder coated trays and brackets.
Key features
- Mounts two batteries in place of the factory single battery location
- Trays and brackets finished in black powder coat
- No drill installation
- Mounting kit only, with no wiring included
- Suggested wiring diagram included with the kit
- Upgrade type with a dual battery count
Planning a second battery
Trail rigs with a winch, compressor, lights or a fuel pump put heavy and repeated demands on the electrical system. A winch in particular can pull large current for long stretches, so a second battery adds reserve for those jobs and keeps the starting battery available for the engine.
Because this kit leaves wiring to the installer, plan the cable routes, fusing and charging path before mounting anything. Decide whether the second battery will charge from the alternator through an isolator or relay. Secure both batteries firmly and keep terminals covered in the engine bay.
- Choose cable routes that avoid heat and moving parts
- Fuse each battery’s positive lead near its terminal
- Recheck battery hold-downs after the first trail runs
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11214.51 |
| UPC | 804314175375 |
| Finish | Black powder coat |
| Battery count | Dual |
| Type | Upgrade |
| Installation | No drilling |
| Wiring | Not included; suggested wiring diagram provided |
Vehicle fitment
The kit fits the 1991–1995 Jeep Wrangler (YJ) in the Base, Islander, Renegade, Rio Grande, S, SE and Sahara trims.
The listed fitment does not cover the 1997–2006 Wrangler TJ or the 2007–2018 Wrangler JK. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Side-by-side battery placement applies to 70-95 CJ and Wrangler kits, which can use lead acid or cylindrical sealed gel cell batteries. The stacked layout applies to 97-06 TJ Wrangler kits, which need cylindrical sealed gel cell batteries because of the mounting direction.
Wiring is not part of the kit, so follow the suggested wiring diagram and disconnect the battery before running any new wires.
What’s included
The kit includes the trays and brackets for two batteries, along with a suggested wiring diagram.
Not included: wiring and the batteries themselves.












