Overview
The Rugged Ridge High Mount LED 3rd Brake Light, part number 11585.05, is a six-LED red third brake light for the 2007–2018 Jeep Wrangler JK. It is designed to work with the stock high mount brake light bracket, so it mounts on the factory bracket for a bolt-on installation.
The six super-bright red LEDs give more light output than factory conventional bulbs. The housing and connectors are durable and water resistant, built for all-weather use on the JK.
Key features
- Six super-bright red LEDs
- Designed for the stock high mount brake light bracket
- Bolt-on installation
- Water resistant housing and connectors
- Brighter output than factory conventional bulbs.
Before you install
A third brake light is the high mounted lamp that signals braking to drivers behind you, and a failed one often goes unnoticed until someone points it out. Before fitting any replacement, check that the bracket is secure, the wiring connector is clean and dry, and the light sits square in its mount. Replacing the housing usually means also looking at the wiring harness and connector seal, since moisture is a common cause of trouble in a rear lamp.
LED units draw less current than conventional bulbs, but they still need a good ground and a steady brake signal. After installation, have someone press the brake pedal while you watch the light from outside the vehicle, and confirm it lights with the other brake lamps. Keep the lens clean, because road grime and dust reduce the light it throws.
- Inspect the bracket bolts for tightness before the first drive
- Check the connector for corrosion or water
- Confirm the light works with the brake pedal and parking lights
- Clean the lens periodically with mild soap and water
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11585.05 |
| UPC | 804314293086 |
| Product type | High mount LED 3rd brake light |
| LED count | 6 |
| LED color | Red |
| Mounting | Stock high mount brake light bracket |
| Housing | Durable, water resistant |
| Fitment type | Direct fit |
Vehicle fitment
It is designed for the 2007–2018 Jeep Wrangler JK in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions of those trims.
It is designed for the 2007–2018 Jeep Wrangler JK generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It bolts onto the stock high mount bracket. Test the brake function once the light is in place.
What’s included
The carton holds a single high mount LED 3rd brake light. Check the package contents against your installation before starting.














