Replacement Headlights, Tail Lights & Bulbs
Showing 181–192 of 211 resultsSorted by popularity
-
Replacement Headlights, Tail Lights & Bulbs
DV8 Offroad LED Projector Headlights with Angel Eyes – HL7JK-02
Replacement Headlights, Tail Lights & BulbsDV8 Offroad LED Projector Headlights with Angel Eyes – HL7JK-02
- LED projector headlights with Angel Eyes for the Jeep Wrangler JK
- Direct fit for 2007–2018 Wrangler JK 2-door and Unlimited 4-door trims
- Full wiring harness included
- DV8 Offroad part number HL7JK-02
SKU: DV8HL7JK-02 -
Replacement Headlights, Tail Lights & Bulbs
DV8 Offroad LED Projector Headlights – HL7JK-01
- LED projector headlights for the Jeep Wrangler JK
- Direct fit for 2007–2018 Wrangler JK 2-door and Unlimited 4-door trims
- Full wiring harness included with each style
- DV8 Offroad part number HL7JK-01
SKU: DV8HL7JK-01 -
-
Replacement Light Bulbs
ARB Halogen Bulb (Clear) – HBJ12055
- ARB Halogen Bulb (Clear), part number ARBHBJ12055, is a single halogen bulb with an H3 bulb base.
- Rated 55/85 watts with a clear color.
- Universal fit, so it is not tied to one vehicle year, make or model.
- Bulb type: halogen, sold as a single bulb.
SKU: ARBHBJ12055 -
-
-
Third Brake Lights
Anzo Third Brake Light Assembly – 531083
- Fits 1997–2003 Ford F-150 (Base, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
- Also fits 1999–2003 Ford F-150 Lightning and 2004 Ford F-150 Heritage
- LED light source with a smoke lens
- D.O.T. compliant to S.A.E. standards
- Anzo part number ANZ531083
SKU: ANZ531083 -
Third Brake Lights
Anzo Third Brake Light Assembly – 531079
- Fits 1994–2001 Dodge Ram 1500 and 1994–2002 Dodge Ram 2500 and 3500 per the manufacturer fitment list
- LED third brake light assembly with smoke lens
- Part number ANZ531079 from Anzo’s B-Series line
- D.O.T. compliant to S.A.E. standards
SKU: ANZ531079 -
-
Tail & Brake Lights
Anzo Tail Lights – 311059
- Anzo LED tail light assemblies with clear lens and black housing, sold as a pair
- Part number 311059, direct fit across many 1988–2000 Chevrolet and GMC models
- Fitment list covers C/K pickups, Suburbans, Blazers, Tahoes, Yukons and Escalade
- Trims are listed per model in the fitment details
SKU: ANZ311059
Types of lighting parts here
The category spans complete assemblies and individual bulbs. Assemblies include sealed or projector headlights, round 7-inch units, LED and halogen tail lights, third brake lights and side or roof markers. Bulbs range from basic incandescent types to halogen, xenon-style halogen and LED replacements. Mounting rings, harnesses and housings for round lamps appear as well.
Choosing a bulb or conversion kit
Start with the bulb base type, such as H7, H11, 9006 or 9012, listed in your owner's manual or on the existing bulb. A wrong base will not seat or lock correctly. LED conversions need more care than direct halogen swaps. A halogen housing has a reflector designed around a filament, so an LED with a poor beam pattern can scatter glare toward oncoming drivers. Projector housings usually control an LED more predictably than reflector housings.
- Look for CAN bus compatibility or resistors if the vehicle flags bulb-out warnings.
- Check that the LED driver or heat sink fits behind the housing.
- Confirm the color temperature, since very blue light often reduces useful output in rain and fog.
Tail lights and brake lights
LED tail lights respond faster than filament bulbs and can use less power. Direct-fit sets plug into the factory connector, while universal units such as heated stop, tail and turn lights usually need a wiring harness. Verify lens color and the legal required functions on your vehicle, including stop, turn, tail and reverse.
Installation and aiming
Many bulb swaps are simple, but assemblies can require removing a grille or bumper cover. Disconnect the battery for wiring work, avoid touching halogen glass with bare fingers, and seal housings correctly to prevent moisture. After installing new headlights, re-aim them so the beam cutoff is correct. Lighting equipment rules, color restrictions and DOT or SAE marking requirements vary by state, so check local regulations. Confirm fitment for your exact year, make and model.
Before buying, compare housing style, lens color, bulb base and connector type across the listings. Keep the old assemblies until the new lights are confirmed working, and check that both sides match in color and brightness after a few weeks of use, since mixed ages of bulbs can look uneven.
Common mistakes to avoid
One mistake is buying a bulb by color alone. Two bulbs with the same base can have different wattage and heat output, and a high-wattage replacement can melt a connector or housing designed for lower power. Another is skipping the aim adjustment, which leaves new lights pointing too high or too low. Check aim against a wall at a measured distance, with the vehicle parked on level ground and at normal load.
Moisture is a frequent failure cause. Leave vent caps open and reseal the back of a housing carefully, and replace worn gaskets rather than reusing them. Put a thin layer of dielectric grease on connectors to resist corrosion, which also helps tail light sockets that have turned green. If a light flickers, check the ground connection before replacing the unit.
Finally, keep in mind that headlights lose clarity with age. A cloudy lens may only need polishing and a UV sealant, not replacement.
Popular Replacement Headlights, Tail Lights & Bulbs brands
- Hella (46)
- Oracle Lighting (39)
- Spyder Auto Group (37)
- Anzo (23)
- Putco (17)
- Recon (16)
- JW Speaker (14)
- Morimoto (6)
- DV8 Offroad (2)
- In Pro Carwear (2)
- ARB 4x4 Accessories (2)
- KC HiLites (1)
Shop Replacement Headlights, Tail Lights & Bulbs by type
Replacement Headlights, Tail Lights & Bulbs FAQ
How do I find my headlight bulb size?
Check the owner's manual, look for the number stamped on the base of the existing bulb, or consult the manufacturer's specifications for your year, make and model. High and low beams may use different bulb types.
Can I put LED bulbs in halogen headlights?
Many people do, but results vary. Halogen reflectors are designed for a filament, so some LED bulbs create glare and a poor beam pattern. Projector housings generally work better, and the beam should be re-aimed after installation.
Why does my vehicle show a bulb-out warning with LEDs?
LEDs draw less current than incandescent bulbs, so the vehicle's monitoring may read a fault. Load resistors or CAN bus compatible bulbs are the usual fix, depending on your vehicle.
Are replacement tail lights legal?
Rules differ by state. Generally lights need the correct colors, brightness and functions and often DOT or SAE markings. Check your local regulations before replacing factory lights with aftermarket designs.










