Overview
The Anzo universal halogen headlight replacement, part ANZ841002, is a round headlight unit with a removable H4 halogen bulb. It is designed to replace a 7 in. H4 sealed beam unit and plugs into the OE harness.
The headlight is universal fit, so it is not tied to a specific vehicle. Confirm that your current headlight opening and mounting match the 7 in. size before ordering.
Key features
- Round housing
- Removable H4 halogen bulb included
- Replaces a 7 in. H4 sealed beam unit
- Plugs into the OE harness
Sealed beam and round housings
Sealed beam headlights were once the standard, but many vehicles now use replaceable bulbs in a housing. A round unit that takes a removable H4 bulb gives you a bulb-level swap rather than replacing the whole sealed unit. The housing still sets the beam, so the lens must sit square and the mounting ring must seat fully.
Before removing the old headlight, photograph the wiring and the plug orientation. A connector that is forced can break locking tabs or damage pins. Keep the aim check in mind, since a slightly tilted housing can throw light too high or too low on the road.
- Photograph the wiring before removal
- Check the mounting ring seats fully
- Recheck aim after installation
- Use dielectric grease on connectors
Specifications
| Brand | Anzo |
|---|---|
| Part number | ANZ841002 |
| Shape | Round |
| Bulb type | Halogen, removable H4 bulb |
| Replaces | 7 in. H4 sealed beam unit |
| Connection | OE harness plug-in |
| Fitment type | Universal Fit |
Vehicle fitment
It is universal fit and sized to replace a 7 in. H4 sealed beam. Match the sealed beam size and harness before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The unit plugs into the OE harness, so check that your existing harness plug matches before you remove the old headlight. The H4 bulb is removable and can be handled separately from the housing.
What’s included
One round headlight unit with a removable H4 halogen bulb.









