Lighting & Lighting Accessories
Showing 361–372 of 2467 resultsSorted by popularity
-
-
-
Lighting Accessories
KC HiLites Cyclone V2 Replacement Single Lens (Amber) – 4402
- Amber replacement single lens for the KC HiLites Cyclone V2 5W LED light
- Part number K/C4402
- Universal fit: a lens for the Cyclone V2, not a vehicle-specific part
- Light rated at 600 lumens with a 2.2-inch diameter
SKU: K/C4402 -
Offroad Auxiliary Lights
KC HiLites Cyclone V2 LED 6-Light Rock Light Kit (Clear) – 91040
- KC HiLites Cyclone V2 LED 6-light rock light kit with clear lenses, part number 91040
- Watts 5, lumens 600, flood beam
- Premium fuse block with ground post and switch
- Six wiring harnesses, universal mounts and hardware
SKU: K/C91040 -
Offroad Auxiliary Lights
KC HiLites Cyclone V2 LED 6-Light Rock Light Kit (Amber) – 91041
- KC HiLites Cyclone V2 LED 6-light rock light kit with amber lenses, part number 91041
- Watts 5, lumens 600, flood pattern
- Premium fuse block with ground post and switch
- Six wiring harnesses, universal mounts and hardware
SKU: K/C91041 -
Offroad Auxiliary Lights
KC HiLites Cyclone V2 Flood LED Light (Diffused) – 1359
- Diffused flood LED light, 5W and 600 lumens
- Compact 2.2-inch diameter with a flat profile
- Used for rock crawling, engine bays, wheel wells and truck beds
- Originally designed as an interior dome light for off-road racers
SKU: K/C1359 -
-
Offroad Auxiliary Lights
KC HiLites C-Series RGB LED Rock Light Kit (6-Piece) – 339
- KC HiLites C-Series RGB LED rock light kit, six pieces, part number 339
- Bluetooth app control with over 16 million RGB colors
- IP68 waterproof housing and waterproof wiring connectors
- Universal fit, bracket mounting
SKU: K/C339 -
Lighting Accessories
KC HiLites 8″ HID Vinyl Light Covers (Black/Yellow) – 5818
- KC HiLites 8-inch HID Vinyl Light Covers in black and yellow, part number K/C5818
- Soft vinyl covers for 8-inch round KC lights, sold as a pair
- Universal fitment; match the 8-inch round light diameter
- UV treated, foam lined vinyl construction
SKU: K/C5818 -
Replacement Headlights, Tail Lights & Bulbs
KC HiLites 7″ Gravity LED Pro Headlight (Clear) – 4234
- Direct-fit 7-inch round LED headlight assembly in clear, part number K/C4234
- Fits the 2007–2018 Jeep Wrangler (JK) in 2-door and Unlimited 4-door trims
- Built-in DRL (daytime running lights) and hard-coated polycarbonate lens
- Gravity LED Pro optics with a GRD LED core and Gravity Projector Orb (GPO) optic
- Ready to install with plug and play connectors; meets US DOT requirements.
SKU: K/C4234 -
Driving Lights
KC HiLites 5″ Apollo Pro Series Driving Light – 1451
- KC Apollo Pro Series 5 inch driving light
- Replaceable 55W halogen bulb with polished reflector
- Polymax housing and optical quality glass lens
- Two axis mount for easy aiming
- Available in Long Range, Driving, Fog or Flood beam patterns
SKU: K/C1451
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.











