Overview
The KC HiLites 7-inch Gravity LED Pro Headlight, part number K/C4234, is a clear 7-inch round LED headlight assembly for the 2007–2018 Jeep Wrangler JK. It is the brand’s flagship LED headlight and a direct-fit replacement for the stock headlights on that model.
The headlight is built around the brand’s patented Gravity LED technology, which connects the light from the LEDs to reflector optics at what KC describes as the most ideal angles, aiming to capture more of the LED output for the beam. A proprietary projector lens with a GRD LED core behind it forms the Gravity Projector Orb (GPO) optic, which KC says gives finer control over beam shape and output. The housing includes built-in daytime running lights (DRL), and the lens is hard-coated polycarbonate.
Owners weighing LED headlight upgrades for a JK will mostly look at the optics and the built-in DRL. The optics were developed with feedback from enthusiasts, industry professionals and athletes, and the beam is designed to balance width, height and distance.
Key features
- Gravity LED technology with reflector optics aimed at high light output and long beam distance.
- Gravity Projector Orb (GPO) optic with a proprietary projector lens and GRD LED core.
- Built-in DRL (daytime running lights) in the headlight housing.
- Hard-coated polycarbonate lens.
- Ready to install with plug and play connectors.
- Meets US DOT requirements.
Living with a built-in DRL
A built-in daytime running light means the headlight stays lit with the engine running, so the lens and housing work more often than a standard light. Keep the lens clean and check the seal around the housing at regular service intervals. Moisture inside the housing can build up in wet weather and affects both the DRL and the main beam.
On a Jeep Wrangler JK, the lamp is usually aimed again after any change to tires, suspension height or the bumper. Aim the low beam first, since it sets the cutoff line for oncoming drivers, then set the high beam. Use a level surface and the vehicle at its normal load for the most reliable check.
- Lens cleaned with mild soap and water
- Housing seal inspected at each service
- Aim re-checked after tire or suspension changes
- DRL wiring inspected for chafing near the frame
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | K/C4234 |
| Color | Clear |
| Fitment | Direct fit |
| Type | Headlight assembly |
| Size | 7 inches round |
| Light source | LED with built-in DRL |
| Lens | Hard-coated polycarbonate |
| Compliance | Meets US DOT requirements |
Vehicle fitment
The fitment covers the 2007–2018 Jeep Wrangler (JK) in 2-door trims 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X, and in 4-door Unlimited trims 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X.
Earlier Wrangler generations such as the TJ or LJ, and the later JL, are not covered by this fitment. Compare your year, model and trim with the list above before installing.
Installation notes
The headlight comes ready to install with plug and play connectors, so no wiring changes are needed. Check that the installed lamp meets local road-use rules for headlights and built-in DRL before driving on public roads.
What’s included
The headlight assembly with built-in DRL and plug and play connectors is the item covered here. Verify the package contents match what your installation requires before starting.












