Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 661–672 of 902 resultsSorted by popularity
-
-
Shock Absorbers & Shock Accessories
Fabtech Performance Series Shock Absorber for 6 Inch Lift – FTS7358
Shock Absorbers & Shock AccessoriesFabtech Performance Series Shock Absorber for 6 Inch Lift – FTS7358
- Front Fabtech Performance Series twin tube hydraulic shock, part number FABFTS7358
- Fits the 2020–2021 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD in listed trims
- Part of Fabtech 6 inch lift kits K1161 and K1159
- 9-stage high flow valving and a closed cell foam insert
- Sold individually
SKU: FABFTS7358 -
-
-
Shock Absorbers & Shock Accessories
Fabtech Dirt Logic Coilover Shock Set for 6″ Lift – FTS22332
- Front Fabtech Dirt Logic 2.5 coilover shock set for a 6 inch lift, part number FABFTS22332
- Fits the 2021–2026 Ford F-150 King Ranch, Lariat, Limited, Platinum, SSV, Tremor, XL and XLT
- 2.5 inch body, OEM top mount, bar pin bottom mount
- Gas charged coilover
SKU: FABFTS22332 -
Shock Absorbers & Shock Accessories
Fabtech Dirt Logic Coilover Reservoir Shock Set for 6″ Lift – FTS22333
Shock Absorbers & Shock AccessoriesFabtech Dirt Logic Coilover Reservoir Shock Set for 6″ Lift – FTS22333
- Front Fabtech Dirt Logic 2.5 coilover reservoir shock set for a 6 inch lift, part number FABFTS22333
- Fits the 2021–2026 Ford F-150 King Ranch, Lariat, Limited, Platinum, SSV, Tremor, XL and XLT
- 2.5 inch body diameter, OEM top mount, bar pin bottom mount
- Gas charged
SKU: FABFTS22333 -
Shock Absorbers & Shock Accessories
Fabtech Dirt Logic 4.0 Reservoir Coilover Shock, Passenger Side – FTS835237P
Shock Absorbers & Shock AccessoriesFabtech Dirt Logic 4.0 Reservoir Coilover Shock, Passenger Side – FTS835237P
- Front passenger side Fabtech Dirt Logic 4.0 reservoir coilover, part number FABFTS835237P
- Fits the 2017–2019 Ford F-250 and F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT trims
- 4.0 inch body diameter with eyelet mounts
- Gas charged
SKU: FABFTS835237P -
Shock Absorbers & Shock Accessories
Fabtech Dirt Logic 4.0 Reservoir Coilover Shock, Driver Side – FTS835237D
Shock Absorbers & Shock AccessoriesFabtech Dirt Logic 4.0 Reservoir Coilover Shock, Driver Side – FTS835237D
- Front driver side Fabtech Dirt Logic 4.0 reservoir coilover, part number FABFTS835237D
- Fits the 2017–2019 Ford F-250 and F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT trims
- 4.0 inch body diameter, eyelet top and bottom mounts
- Gas charged
SKU: FABFTS835237D -
Shock Absorbers & Shock Accessories
Fabtech Dirt Logic 4.0 Piggyback Reservoir Coilover Shock, Passenger Side – FTS835232P
Shock Absorbers & Shock AccessoriesFabtech Dirt Logic 4.0 Piggyback Reservoir Coilover Shock, Passenger Side – FTS835232P
- Front passenger side Fabtech Dirt Logic 4.0 piggyback reservoir coilover, part number FABFTS835232P
- Fits the 2017–2019 Ford F-250 and F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT trims
- 4.0 inch body diameter, eyelet top and bottom mounts
- Gas charged
SKU: FABFTS835232P -
Shock Absorbers & Shock Accessories
Fabtech Dirt Logic 4.0 Piggyback Reservoir Coilover Shock – FTS835122
Shock Absorbers & Shock AccessoriesFabtech Dirt Logic 4.0 Piggyback Reservoir Coilover Shock – FTS835122
- Front Fabtech Dirt Logic 4.0 piggyback reservoir coilover shock, part number FABFTS835122
- 4.0 inch body diameter with eyelet top and bottom mounts
- Gas charged coilover design
- No vehicles named; the universal fit label is not a vehicle list
SKU: FABFTS835122
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.







