Overview
The Fabtech Impact Strut Kit, part FTS21020BK, is a strut and mounting kit for the 2.0 Dirt Logic shock series. It is gas charged.
The kit is a strut and mounting kit. Its strut dimensions, included hardware and the vehicle, year or chassis it suits are covered by the fitting check below.
Because a strut kit has to line up with the vehicle’s mounting points, measure the mounts on your truck and compare them with the kit before ordering.
Key features
- Impact strut and mounting kit
- 2.0 Dirt Logic shock series
- Gas charged
Strut kits and mount alignment
A strut kit replaces the part that carries spring load and locates the wheel, so its geometry matters as much as its size. Mount positions, bushing condition and the upper pivot all affect how the steering and suspension feel once the truck is back on the ground. A kit that sits even slightly out of position can cause uneven tire wear or a rattle over bumps.
Inspect the surrounding components before fitting. Worn ball joints, bent control arms and tired bushings are often replaced alongside a strut, since they carry the same loads. Gas charge is commonly chosen for off-road use because it helps the damper keep its feel under repeated hard work, so the kit suits trail driving where the shock works hard.
- Check mount bolts and bushings for wear
- Replace worn ball joints when the strut is out
- Recheck alignment after the first drive
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21020BK |
| Series | 2.0 Dirt Logic |
| Type | Impact strut and mounting kit |
| Charge | Gas charged |
Vehicle fitment
Verify the year, model and trim of your truck before ordering, along with the strut length and mount positions.
Check the strut and mount against your vehicle before installing. Confirm your vehicle’s year, model and trim before ordering.









