Side window vent visors, also called rain guards or wind deflectors, mount on or inside the door window channel so you can crack a window in wet weather. This branch of Exterior Parts and Car Care lists sets in smoke, black and chrome finishes. Auto Ventshade, Rugged Ridge, Lund and Westin are among the brands. See each product page for finish, style and part numbers, then compare the products below.
Side Window Vent Visors
Showing 1–12 of 125 resultsSorted by popularity
-
Bugshields & Vent Visors
Rampage Ventvisor Set (Black) – 94101
- Fits 2009–2018 Dodge Ram 1500 trucks in the trims on the manufacturer fitment list
- Black four-piece Ventvisor side window deflector set
- Attaches with 3M automotive grade adhesive; hardware not included
- UV-resistant textured Tri-Flex material, car wash safe
SKU: RPP94101 -
Bugshields & Vent Visors
LUND Ventvisor Elite (Smoke) – 184761
- Fits 2007–2021 Toyota Tundra Base, Limited, Nightshade, SR5 and TRD Pro trims on the manufacturer fitment list
- LUND Ventvisor Elite smoke in-channel window deflectors, made in the USA
- Part number LII184761; four-piece set
- Scalloped flange and low profile in-channel mounting
SKU: LII184761 -
Bugshields & Vent Visors
Auto Ventshade, Ventvisor (Smoke) – 194167
- Fits 2010–2017 GMC Terrain Denali, SL, SLE and SLT trims on the manufacturer fitment list
- Smoke in-channel Ventvisor deflectors, four-piece set
- No-drill installation with a snug, secure fit
- Part number AVS194167 from Auto Ventshade
SKU: AVS194167 -
Bugshields & Vent Visors
Auto Ventshade Ventvisor Side Window Deflectors (Dark Smoke) – 94249
- Fits 2007–2018 Jeep Wrangler JK Unlimited 4-door trims on the manufacturer fitment list
- Smoke acrylic Ventvisor side window deflectors
- Part number AVS94249 from Auto Ventshade
- Applied with 3M tape; keeps fresh air moving when the windows are open
SKU: AVS94249 -
Bugshields & Vent Visors
Auto Ventshade Ventvisor Side Window Deflector (Dark Smoke) – 94267
- Fits 2011–2026 Dodge Durango in Citadel through Special Service trims, outside mount
- Auto Ventshade part number AVS94267, set of 4 outside-mount side window deflectors
- Modified acrylic in dark smoke finish, no drilling required
- Pre-applied 3M adhesive mounting tape
SKU: AVS94267 -
Bugshields & Vent Visors
Auto Ventshade Ventvisor In-Channel Deflector (Smoke) – 194812
- Fits 2018–2024 GMC Terrain in AT4, Denali, SL, SLE and SLT trims per the manufacturer list
- Part number AVS194812, smoke finish, 4-piece set
- Installs in the window channel; no exterior tape touches the vehicle
- Limited Lifetime Warranty, made in the USA
SKU: AVS194812 -
Bugshields & Vent Visors
Auto Ventshade Ventvisor In-Channel Deflector (Smoke) – 192002
- Fits Dodge Ram 1500, 2500 and 3500 pickups, 2009–2024, per the manufacturer list
- Part number AVS192002, smoke finish, 2 pc. front set
- In-channel mount with pre-applied 3M automotive tape
- No drilling or special hardware required
SKU: AVS192002 -
Bugshields & Vent Visors
Auto Ventshade Ventvisor In-Channel Deflector – 194768
- Fits 2016–2023 Toyota Tacoma in Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and Trail trims
- Part number AVS194768, smoke finish
- Installs in the window channel with pre-applied 3M automotive tape
- Keeps rain out and lets fresh air in, with no drilling
SKU: AVS194768 -
Bugshields & Vent Visors
Auto Ventshade Ventvisor Deflector 2 pc. (Smoke) – 92301
- Fits 2014–2019 Chevrolet Silverado and GMC Sierra 1500, 2500 HD and 3500 HD pickups per the manufacturer list
- Part number AVS92301, smoke finish, 2 pc. front set
- Pre-applied 3M adhesive mounting tape, no drilling
- Made in the USA, safe for car washes
SKU: AVS92301 -
-
Bugshields & Vent Visors
Auto Ventshade Ventvisor Deflector (Smoke) – 94109
- Fits Dodge Ram 1500, 2500 and 3500 pickups from 2009 to 2024 per the manufacturer list
- Part number AVS94109, smoke finish, 4 pc. set
- External mount with 3M automotive adhesive tape
- Impact resistant acrylic, car-wash safe, Limited Lifetime Warranty
SKU: AVS94109 -
Bugshields & Vent Visors
Auto Ventshade Ventvisor Deflector (Smoke) – 92467
- Fits 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator per the manufacturer list
- Part number AVS92467, smoke finish, front position
- Keeps rain out, lets fresh air in, and helps reduce interior heat and fogging
- Impact-resistant acrylic, car-wash safe, made in the USA
SKU: AVS92467
What vent visors do
A vent visor is a narrow acrylic or similar shield that fits above a side window. It lets fresh air in during rain or snow, reduces wind noise and buffeting with the window partly open, and cuts some glare and sun on the glass. Most sets cover the front and rear doors, and the listings here are mostly four-piece sets, with a few front-only and Jeep-specific kits.
In-channel versus tape-on
- In-channel: the visor slides into the window channel and is held by tension. It has a clean, integrated look and no adhesive on the paint, but it can interfere with window travel or seals on some vehicles, and may rattle if poorly seated.
- Tape-on or exterior mount: the visor attaches with automotive-grade adhesive tape to the door frame. It is simple to install, but proper surface prep is important.
Low-profile versions have a slimmer look that sits closer to the door, while standard designs extend farther and give more rain coverage.
Choosing a finish and set
Smoke is the most common finish, with some black, textured black, carbon-fiber look and chrome options. Match the finish to your trim and window tint. Check the piece count: four-piece sets cover all doors on a four-door model, whereas two-door vehicles need fewer pieces. Some Wrangler sets are designed for the factory doors specifically, so confirm that detail.
Installation tips
Install in mild temperature, 60 degrees Fahrenheit or warmer, so the adhesive bonds correctly. Clean the mounting area with the supplied wipes or isopropyl alcohol, test-fit before peeling the tape, and press firmly along the full length. Avoid washing the vehicle or rolling windows for the period the instructions state, usually 24 hours. For in-channel types, follow the manufacturer's sequence for flexing and seating the visor, and do not force it.
Some drivers wonder how visors affect visibility and everyday use. Smoke finishes tint the area above the glass slightly, which most people find comfortable, and the narrow profile should not block your view of side mirrors or traffic lights. Low-profile styles hug the door and minimize wind noise at highway speed, while wider shields give more rain coverage when parked. If you use a roof rack, awning or door-mounted accessory, check that nothing contacts the visor.
Care is simple. Wash visors with the vehicle using mild soap and a soft cloth, and avoid abrasive brushes or harsh solvents that can haze acrylic. Automatic car washes with strong brushes can catch the edges of tape-on visors, so check for lifting after a wash. If an adhesive visor does lift, remove it, clean off old adhesive residue with a product made for automotive finishes and refit with fresh tape from the manufacturer. In-channel units that become loose over time can often be reseated, and a gentle wipe of the channel helps remove grit that causes rattles.
Fitment
Visors are made for specific year, make, model and cab or door configurations. Confirm your exact application and review the manufacturer's specifications before choosing a product below.
Popular Side Window Vent Visors brands
Side Window Vent Visors FAQ
What is the difference between in-channel and tape-on vent visors?
In-channel visors slide into the window channel and hold by tension, so there is no adhesive on the door frame. Tape-on visors stick to the exterior frame with automotive tape. In-channel looks cleaner, while tape-on is often easier to fit.
Do window vent visors cause wind noise?
They usually reduce wind noise and buffeting when a window is cracked open, though results vary by vehicle and speed. A poorly seated in-channel visor can rattle or whistle, so make sure it is fully seated and the window closes normally.
Can I wash my vehicle after installing vent visors?
Wait until the adhesive has cured, typically around 24 hours, though the exact time is in the manufacturer's instructions. In-channel visors do not rely on adhesive, but you should still follow the maker's guidance after fitting.
Will vent visors fit my Jeep or truck?
Visors are made for specific vehicles and door styles, so check the year, make, model and number of doors against the product listing. Confirm details such as factory versus aftermarket doors in the manufacturer's specifications.











