Side Window Vent Visors
Showing 37–48 of 125 resultsSorted by popularity
-
Bugshields & Vent Visors
Auto Ventshade Low Profile Ventvisor (Smoke) – 894027
- Fits 2010–2024 Toyota 4Runner per the manufacturer fitment list
- Part number AVS894027, smoke low profile ventvisor, 4-piece set
- Fits front and rear doors with a sleek, low profile look
- Easy no-drill installation, car wash safe, made in the USA
SKU: AVS894027 -
-
Bugshields & Vent Visors
Auto Ventshade Low Profile Deflector – 774033
- Fits 2014–2019 Chevrolet Silverado and GMC Sierra pickups (1500, 2500 HD and 3500 HD) in applicable trims
- Part number AVS774033, matte black ABS low profile design
- 4-piece set with internal (in window channel) or external (above window) mounts
- Attaches with 3M automotive-grade adhesive or mechanical fasteners, car wash safe
SKU: AVS774033 -
Bugshields & Vent Visors
Auto Ventshade Low Profile Deflector – 1774036
- Fits 2016–2023 Toyota Tacoma per the manufacturer fitment list
- Part number AVS1774036, matte black low profile deflector in Tri-Flex ABS
- Two products packaged together as an easy-to-build set
- UV-protected, Limited Lifetime Warranty, made in the U.S.A.
SKU: AVS1774036 -
Bugshields & Vent Visors
Auto Ventshade In-Channel Ventvisor Side Window Deflectors (Smoke) – 194249
Bugshields & Vent VisorsAuto Ventshade In-Channel Ventvisor Side Window Deflectors (Smoke) – 194249
- Fits 2007–2018 Jeep Wrangler JK Unlimited 4-door models
- Part number AVS194249, smoke in-channel ventvisor side window deflectors
- 4-piece set, custom made from higher-grade acrylic
- No drilling, pre-applied 3M automotive tape, Limited Lifetime Warranty
- Covers over 200 vehicle applications across trucks, SUVs, vans and cars
SKU: AVS194249 -
Bugshields & Vent Visors
Auto Ventshade In-Channel Ventvisor (Smoke) – 194811
- Fits 2018–2026 Jeep Wrangler JL Unlimited 4-door and 2020–2026 Jeep Gladiator
- Part number AVS194811, smoke 4-piece in-channel ventvisor set
- Fits front and rear doors on 4-door models
- No drilling required, Limited Lifetime Warranty, made in the USA
SKU: AVS194811 -
Bugshields & Vent Visors
Auto Ventshade In-Channel Ventvisor (Smoke) – 194738
- Fits 2004–2014 Ford F-150 pickups per the manufacturer fitment list
- Part number AVS194738, smoke in-channel ventvisor set
- Four pieces for front and rear doors, custom made from acrylic
- Mounts without drilling and carries a Limited Lifetime Warranty
SKU: AVS194738 -
Bugshields & Vent Visors
Auto Ventshade In-Channel Ventvisor (Smoke) – 194443
- Fits 2004–2008 Ford F-150 and 2006–2008 Lincoln Mark LT per the manufacturer fitment list
- Part number AVS194443, smoke tinted acrylic in-channel ventvisor
- 4-piece set for front and rear doors, no drilling or special hardware
- Lets fresh air in while keeping rain out, with a Limited Lifetime Warranty
SKU: AVS194443 -
Bugshields & Vent Visors
Auto Ventshade In-Channel Ventvisor (Smoke) – 194405
- Fits 2001–2004 Toyota Tacoma (Base, Pre Runner)
- Four-piece smoke in-channel ventvisor set for front and rear doors
- Part number AVS194405, Auto Ventshade
- Rain guard design, reduces wind noise and mirror fogging
- No drilling or special hardware; Limited Lifetime Warranty
SKU: AVS194405 -
Bugshields & Vent Visors
Auto Ventshade In-Channel Ventvisor (Smoke) – 192711
- Fits 2007–2017 Toyota Tundra (Base, SR, SR5) front doors
- Two-piece smoke in-channel ventvisor set
- Part number AVS192711, Auto Ventshade
- Rain guard design, reduces wind noise and mirror fogging
- No drilling or special hardware; Limited Lifetime Warranty
SKU: AVS192711 -
Bugshields & Vent Visors
Auto Ventshade In-Channel Ventvisor (Smoke) – 192455
- Direct fit for Chevrolet Express and GMC Savana 1500 models, 1996–2014, and 2500 and 3500 models, 1996–2021
- Two-piece front set of smoke in-channel ventvisors
- Part number AVS192455, Auto Ventshade
- Sleek, streamlined look with greater visibility and decreased wind noise
- No drilling; Limited Lifetime Warranty
SKU: AVS192455 -
Bugshields & Vent Visors
Auto Ventshade In-Channel Ventvisor (Smoke) – 192352
- Two-piece in-channel ventvisor for front doors
- Fits 1994–2001 Dodge Ram 1500 and 1994–2002 Dodge Ram 2500 and 3500 (Base trim for 2500 and 3500)
- Smoke acrylic with a Limited Lifetime Warranty
- Part number AVS192352
SKU: AVS192352
What vent visors do
A vent visor is a narrow acrylic or similar shield that fits above a side window. It lets fresh air in during rain or snow, reduces wind noise and buffeting with the window partly open, and cuts some glare and sun on the glass. Most sets cover the front and rear doors, and the listings here are mostly four-piece sets, with a few front-only and Jeep-specific kits.
In-channel versus tape-on
- In-channel: the visor slides into the window channel and is held by tension. It has a clean, integrated look and no adhesive on the paint, but it can interfere with window travel or seals on some vehicles, and may rattle if poorly seated.
- Tape-on or exterior mount: the visor attaches with automotive-grade adhesive tape to the door frame. It is simple to install, but proper surface prep is important.
Low-profile versions have a slimmer look that sits closer to the door, while standard designs extend farther and give more rain coverage.
Choosing a finish and set
Smoke is the most common finish, with some black, textured black, carbon-fiber look and chrome options. Match the finish to your trim and window tint. Check the piece count: four-piece sets cover all doors on a four-door model, whereas two-door vehicles need fewer pieces. Some Wrangler sets are designed for the factory doors specifically, so confirm that detail.
Installation tips
Install in mild temperature, 60 degrees Fahrenheit or warmer, so the adhesive bonds correctly. Clean the mounting area with the supplied wipes or isopropyl alcohol, test-fit before peeling the tape, and press firmly along the full length. Avoid washing the vehicle or rolling windows for the period the instructions state, usually 24 hours. For in-channel types, follow the manufacturer's sequence for flexing and seating the visor, and do not force it.
Some drivers wonder how visors affect visibility and everyday use. Smoke finishes tint the area above the glass slightly, which most people find comfortable, and the narrow profile should not block your view of side mirrors or traffic lights. Low-profile styles hug the door and minimize wind noise at highway speed, while wider shields give more rain coverage when parked. If you use a roof rack, awning or door-mounted accessory, check that nothing contacts the visor.
Care is simple. Wash visors with the vehicle using mild soap and a soft cloth, and avoid abrasive brushes or harsh solvents that can haze acrylic. Automatic car washes with strong brushes can catch the edges of tape-on visors, so check for lifting after a wash. If an adhesive visor does lift, remove it, clean off old adhesive residue with a product made for automotive finishes and refit with fresh tape from the manufacturer. In-channel units that become loose over time can often be reseated, and a gentle wipe of the channel helps remove grit that causes rattles.
Fitment
Visors are made for specific year, make, model and cab or door configurations. Confirm your exact application and review the manufacturer's specifications before choosing a product below.
Popular Side Window Vent Visors brands
Side Window Vent Visors FAQ
What is the difference between in-channel and tape-on vent visors?
In-channel visors slide into the window channel and hold by tension, so there is no adhesive on the door frame. Tape-on visors stick to the exterior frame with automotive tape. In-channel looks cleaner, while tape-on is often easier to fit.
Do window vent visors cause wind noise?
They usually reduce wind noise and buffeting when a window is cracked open, though results vary by vehicle and speed. A poorly seated in-channel visor can rattle or whistle, so make sure it is fully seated and the window closes normally.
Can I wash my vehicle after installing vent visors?
Wait until the adhesive has cured, typically around 24 hours, though the exact time is in the manufacturer's instructions. In-channel visors do not rely on adhesive, but you should still follow the maker's guidance after fitting.
Will vent visors fit my Jeep or truck?
Visors are made for specific vehicles and door styles, so check the year, make, model and number of doors against the product listing. Confirm details such as factory versus aftermarket doors in the manufacturer's specifications.










