Overview
The Auto Ventshade Smoke Ventvisor, part number AVS94819, is a 4-piece smoke-finish side window deflector for the 2002–2010 Ford Explorer, the 2003–2005 Lincoln Aviator and the 2002–2010 Mercury Mountaineer.
Each Ventvisor shades its window so fresh air can come in and rain stays out, which makes it possible to leave the windows partly open. The design is intended to reduce heat build-up in the cab. Mounting uses 3M adhesive foam tape with no drilling.
Key features
- Keeps rain out while the window is partly open
- Original Ventvisor design
- Reduces heat build-up in the cab.
- Attaches with 3M Adhesive Foam Tape, no drill installation
- Smoke finish, supplied as 4 pieces
- Limited Lifetime Warranty
Before you buy
A side window deflector sits on the outside of the door glass and angles air over the top of the opening. When the window is cracked on a warm day or during rain, the shield lets air move through the gap while directing water away from the cab. Smoke tint is a common choice for owners who want the accessory to blend with dark factory trim.
Adhesive-mounted deflectors depend on a clean surface. Dry the door frame fully and remove wax or sealant before applying the tape, because residue weakens the bond. Press each piece firmly along its full length, then give the adhesive time to set before opening the window or taking the vehicle through a wash.
Over time, check the leading edge where the deflector meets the frame. Lifting corners, grit trapped under the edge, or a dull film on the acrylic are signs the piece may need cleaning or reattaching.
- Clean the acrylic with mild soap and a soft cloth
- Check the edges for lifting after the first few drives
- Keep the mounting area free of wax and road grime
- Set placement before pressing the tape down, since repositioning weakens the bond
Specifications
| Brand | Auto Ventshade |
|---|---|
| Part number | AVS94819 |
| Product type | Ventvisor side window deflector |
| Quantity | 4 pieces |
| Finish | Smoke |
| Fit type | Direct fit |
| Mounting | 3M adhesive foam tape, no drilling |
| Warranty | Limited Lifetime |
Vehicle fitment
The manufacturer fitment list covers the 2002–2010 Ford Explorer in the Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT and XLT Sport trims, the 2003–2005 Lincoln Aviator in the Base trim, and the 2002–2010 Mercury Mountaineer in the Base, Convenience, Luxury and Premier trims.
Fitment covers the 2002–2010 Ford Explorer in the Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT and XLT Sport trims, the 2003–2005 Lincoln Aviator in the Base trim, and the 2002–2010 Mercury Mountaineer in the Base, Convenience, Luxury and Premier trims. Confirm fit for your year, model and trim before ordering.
Installation notes
Because the deflectors use 3M adhesive foam tape, this set does not require drilling into the body of the vehicle.
What’s included
Four smoke-finish Ventvisor pieces, per the 4-piece count.









