Switch Pods
Showing 61–72 of 76 resultsSorted by popularity
-
Switch Pods
Daystar Dash Switch Panel – KJ71034BK
- Daystar Dash Switch Panel KJ71034BK for dash mounting
- Fits 2007-2018 Jeep Wrangler JK, 2- and 4-door models
- Mounts up to 5 rocker switches for fog lights, air compressors and more
- Automatic transmission only; black, with tan also mentioned
- Rocker switches sold separately
SKU: DAYKJ71034BK -
-
Switch Pods
Daystar Dash Switch Panel – KJ71034TN
- Tan dash switch panel mounted in front of the shifter
- Holds up to 5 rocker switches for fog lights and air compressors
- Fits the Jeep Wrangler JK, 2007-2018
- 2-door and 4-door models, automatic transmissions only
- Rocker switches sold separately
SKU: DAYKJ71034TN -
Switch Pods
Daystar Switch Panel with 4 Switches (Black) – KJ71038BK
- Black dash switch panel for 2011–2012 Jeep Wrangler JK
- Holds up to five rocker switches in front of the shifter
- Kit includes one red, one blue, one amber and one green switch
- Installs with the factory clips, made in the USA
- Daystar part KJ71038BK, UPC 618089004514
SKU: DAYKJ71038BK -
-
-
Switch Pods
Advanced Accessory Concepts Trigger 8′ Extension Connectors – 2007
- Advanced Accessory Concepts Trigger 8 foot extension harness
- 12-gauge male and female connectors
- Sealed wires, waterproof connectors and shielded insulation
- Universal fit, not vehicle-specific
- UPC 858208006931
SKU: AAC2007 -
-
-
Switch Pods
2009 – 2017 JK model 6 Switch System & Source System with Red Switches
- Six double-light red LED switches with a fused Source power block
- Pre-wired lights and a two-piece harness with Deutsch connectors
- Integrated low-voltage cutoff protects battery charge for starting
- Fits 2009–2017 Jeep Wrangler JK, 2-door and 4-door
- SPOD system with red switches, UPC 6000915LTLEDRII
SKU: POD600-0915LT-LEDR -
Switch Pods
2009 – 2017 JK model 6 Switch System & Source System with Green Switches
- Six double-light green LED switches with a fused Source power block
- Pre-wired lights and a two-piece harness with Deutsch connectors
- Integrated low-voltage cutoff protects battery charge for starting
- Fits 2009–2017 Jeep Wrangler JK models
- SPOD system with green switches, UPC 816482020487
SKU: POD600-0915LT-LEDG
What a switch pod does
Off-road builds add many electrical accessories: light bars, rock lights, air compressors, winches and cameras. A switch pod puts the controls in one panel, usually near the driver, and ties them to a relay-based control unit under the hood or dash. This keeps current-carrying wires away from the cabin and reduces the clutter of individual switches added in random places.
Types of systems
- Vehicle-specific kits are shaped to fit the dash or console of particular models, such as a Wrangler TJ or a Tacoma. They often use factory mounting points for a clean look.
- Universal panels and bezels mount in a bracket, roll bar or console, and suit custom builds.
- Control systems use a power module that handles the high-current switching. Some are driven by a touchscreen or a small switch panel.
- Harnesses and accessories include extension wiring, battery cables and mounts for tablets or screens.
What to compare
- Number of switches: count the accessories you run now, then add a few spare circuits for future upgrades.
- Current rating: every circuit and the main feed have a maximum amperage. Add up what you will connect and stay below the rating.
- Switch type: rocker, toggle, momentary or programmable. Momentary functions suit horns and winch-style actions.
- Environmental protection: consider whether the control module is sealed against moisture if it will be under the hood.
- Illumination: backlit switches help at night, but check that the brightness is adjustable.
Installation notes
Disconnect the battery before starting work. Use properly sized wire for the load, a fuse or breaker near the battery, and weatherproof connectors where wires pass through the firewall. Route wiring away from heat and moving parts, and use grommets to protect it at pass-throughs. Test each circuit before closing up the dash. Systems that connect to a vehicle's factory harness should be confirmed against the wiring information for your exact year, make and model. If wiring is unfamiliar, have an automotive electrician perform the installation.
Labeling and upkeep
Label each switch clearly, since a panel full of identical rockers is easy to misread in the dark. Periodically check connectors for corrosion, confirm that fuses are the right rating and keep a spare set of fuses in the vehicle.
Planning and common mistakes
Before buying a system, make a list of every accessory you expect to run now and in the future. Write down the amperage of each, since that determines wire size, fuse size and the control unit's capacity. Pods are easier to install when you choose a mounting location first. Consider whether the driver can reach the switches comfortably without taking eyes from the road, and whether passengers or seat belts could accidentally hit them.
- Do not share one circuit between large loads. A pair of light bars and a compressor should not run off the same fused lead.
- Do not skip the main fuse. Place a fuse or breaker near the battery on the feed wire, because a short anywhere along the run could otherwise ignite insulation.
- Do not rely on tape. Use heat-shrink connectors or sealed terminals, particularly in the engine bay.
- Keep ignition-switched and constant power separate if you do not want accessories draining the battery when parked.
Popular Switch Pods brands
- SPOD (40)
- Rugged Ridge (16)
- Daystar (8)
- Advanced Accessory Concepts (8)
- Painless Wiring (8)
- ARB 4x4 Accessories (6)
Switch Pods FAQ
Do I need a switch pod to run off-road lights?
No, individual switches and relays work too. A switch pod simply organizes controls in one place and often includes the relays and fusing, which can make wiring cleaner and easier to expand later.
Can a switch pod handle an air compressor or winch?
Only if the circuit rating supports the draw. Compressors and winches pull high current, so check the amp rating of the module and wiring, and consider wiring them directly through a dedicated relay and breaker.
Will a vehicle-specific pod fit my dash?
Vehicle-specific kits are shaped for particular models and years, and dash designs change. Confirm the listed fitment for your exact year, make and model before choosing a part number.
Is installation difficult?
Basic kits need simple hand tools, a fuse and clean wiring. The main risks are undersized wire, poor connections and missing fuses. If you are unsure about automotive wiring, use a qualified installer.











