Select your vehicle

SPOD Modular 6 Switch Panel – 700-MOD

SPOD

Shop SPOD Switch Pods on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Modular 6-switch panel with switches installed and wired
  • Six dual 24v LED Contura rocker switches
  • 12-position terminal block for accessories
  • Six ATO fuses: three 15 amp and three 30 amp
  • Mounts to the top of the fuse box

Description

Overview

The SPOD 700-MOD is a modular six-switch panel that mounts to the top of a fuse box and arrives with its switches installed and wired. SPOD lists universal application, so the panel is not built for one vehicle. Six dual 24v LED Contura rocker switches come pre-wired and ready to use.

The panel also includes a 12-position terminal block for attaching accessories, 8-gauge power leads with crimped and soldered terminals for the battery, and six ATO fuses. Every wire is wrapped in high-temp abrasion-resistant nylon braided sleeving.

Key features

  • Switches arrive installed and pre-wired
  • Six dual 24v LED Contura rocker switches
  • 12-position terminal block for accessory connections
  • 8-gauge power leads with crimped and soldered terminals
  • Wires wrapped in high-temp abrasion-resistant nylon braided sleeving

Planning the wiring

A switch panel is only as reliable as the wiring behind it. Plan the route for the power leads before mounting the panel, keeping them away from sharp edges, moving linkage and hot exhaust components. Secure the harness with loom or clips so it does not rub, and leave a small amount of slack at each connection point so the panel can be removed for service without strain on the terminals.

Accessory loads should be matched to the fuse rating and the wire gauge. Check the current draw of each device before connecting it to the terminal block, and avoid running several high-draw accessories from one circuit. Periodically inspect the crimps and the fuse holders for heat discoloration, corrosion or loose connections, especially in vehicles that see off-road use and water crossings.

  • Route leads away from heat and moving parts
  • Secure harness with loom or clips
  • Match accessory loads to fuse ratings

Specifications

Brand SPOD
Part number 700-MOD
UPC 700007270251
Switches 6 dual 24v LED Contura rocker switches, installed and pre-wired
Terminal block 12 position
Power leads 8 gauge, crimped and soldered terminal for battery connection
Fuses 6 ATO style automotive fuses: (3) 15 amp and (3) 30 amp
Wire sleeving High temp abrasion resistant nylon braid
Mounting Top of fuse box

Vehicle fitment

Fitment is not vehicle-specific: universal application is stated. Whether the panel suits your vehicle depends on whether the top of its fuse box has room for the mount.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The panel mounts to the top of the fuse box, and the 8-gauge power leads run to the battery. Some cutting and drilling is required, so plan for that before installing.

What’s included

Six pre-wired dual 24v LED Contura rocker switches, a 12 position terminal block, 8 gauge power leads, and six ATO fuses ((3) 15 amp and (3) 30 amp).

SKU: POD700-MOD Category:

Specification

Shipping weight 6.50 lbs
Package dimensions 12.00 × 12.00 × 7.00 in
brands

Questions & Answers

Does the SPOD 700-MOD require extra wiring?

No extra wiring is required for the switches. The six rocker switches arrive installed and pre-wired, but the 8-gauge power leads must still be connected to the battery, and some cutting and drilling is needed.

Will the SPOD 700-MOD fit my vehicle?

SPOD lists universal application, so no specific vehicle years, models or trims are given. Check that the top of your fuse box has room for the panel, then confirm your vehicle before buying.

What fuses come with the SPOD 700-MOD?

Six ATO style automotive fuses are supplied: three 15 amp and three 30 amp. The panel also has a 12 position terminal block for attaching accessories.

Should a battery disconnect switch be added to the panel circuit?

Many builds add one because it lets the vehicle be isolated for service or storage. A disconnect placed on the main power lead should be rated for the current the circuit will carry, and it should be installed by following the wiring plan for the panel.

How often should the fuses be checked?

Check them whenever a switch stops working and during routine inspections of the wiring. Look for a blown or discolored fuse, and replace it only with one of the same rating so the circuit is protected as designed.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop SPOD Switch Pods on Amazon