Overview
The Advanced Accessory Concepts Trigger 8′ Extension Connectors are an 8 foot, 12-gauge male and female extension harness for the Trigger Accessory Control System. They extend the reach of that system. The harness is universal fit, so it is not tied to a single vehicle.
The connectors are waterproof, the wires are sealed and the insulation is shielded. No separate part number is given, so use the UPC 858208006931 when checking the harness.
Key features
- 8 foot extension length
- 12-gauge male and female connectors
- Sealed wires
- Waterproof connectors
- Shielded insulation
Routing and protecting the run
An extension harness adds length between a controller and an accessory, so most of the work is in the routing. Keep the run away from hot exhaust parts, moving suspension components and sharp edges. Secure it with cable ties or clips at regular intervals so it does not sag or rub through.
Plug connections are the most likely places for trouble. Keep them off the floor where water and dirt collect, and use the connectors’ sealing feature to protect the joint. Inspect the jacket each season for cracks, and check that the wire gauge suits the load on the accessory end.
- Add a drip loop at the connector to shed water
- Use grommets where the harness passes through panels
- Check connectors for corrosion during routine service
- Avoid tight bends near the connector housings
Specifications
| Brand | Advanced Accessory Concepts |
|---|---|
| UPC | 858208006931 |
| Length | 8 foot |
| Wire gauge | 12-gauge |
| Connector type | Male and female |
| Wires | Sealed |
| Connectors | Waterproof |
| Insulation | Shielded |
| Fitment | Universal fit |
Vehicle fitment
This harness is universal fit rather than vehicle-specific. Confirm the 8 foot length and 12-gauge connectors suit the run between your Trigger controller and the accessory.
What’s included
The 8 foot extension harness with male and female connectors.












