Overview
The Advanced Accessory Concepts Trigger 6-inch Y connector harness, part 2004, lets one circuit power two individual accessories. It is a 12-gauge harness that extends Trigger Accessory Control System wiring.
The harness has sealed wires, waterproof connectors and shielded insulation. Advanced Accessory Concepts lists universal fit for it, so it is not tied to a single vehicle.
Key features
- 6-inch length
- Y connector lets one circuit feed two accessories
- 12-gauge wire
- Sealed wires, waterproof connectors and shielded insulation
Wiring and accessory loads
A Y harness splits one power feed into two branches, so the circuit behind it carries the combined draw of both accessories. Before adding a second light bar or pod to an existing feed, add up what the circuit already runs. A fuse or breaker sized for the original load may not protect the wiring once more current flows through it.
Routing matters as much as the connectors. Keep harness runs away from moving suspension parts, exhaust heat and sharp edges, and secure the wire with clips at regular spacing. Shielded insulation helps reduce interference, but it does not protect a wire that has been pinched or chafed. Check connections periodically, especially after rough driving, and look for corrosion or loose terminals.
Specifications
| Brand | Advanced Accessory Concepts |
|---|---|
| Part number | 2004 |
| UPC | 858208006900 |
| Length | 6 inches |
| Connector type | Y connector harness |
| Wire gauge | 12 gauge |
| Insulation | Shielded |
| Fitment type | Universal fit |
Vehicle fitment
Universal fit is stated, so this harness is not tied to a vehicle year, model or trim. It works with the Trigger Accessory Control System.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
6-inch, 12-gauge Y connector harness.












