Overview
The Pro Comp 13-90365A is a square U-bolt in 9/16 in -18 thread and is made from low-alloy, high strength steel. It is equivalent to a Grade 5 bolt, clear zinc plated and packaged with hardware, and it measures 2.4375 in by 7.8215 in.
It is clear zinc plated and packaged with hardware, and it measures 2.4375 in by 7.8215 in.
Key features
- Low-alloy, high strength steel
- Equivalent to a Grade 5 bolt
- Clear zinc plating
- Square profile
- Packaged with hardware
Care and maintenance
Zinc plating protects the steel by giving up its surface first when it meets moisture, so inspection focuses on areas where that layer may have worn away. Look at the bends, the thread ends and any spot that rubs against the spring or axle, where scratches are most likely. A small amount of surface rust there is a sign the coating needs attention.
Keep the threads clean before assembly and check that nuts run down freely by hand. Damaged threads reduce clamp load, so replace a U-bolt that shows stretching or flat spots. After installation, recheck the nuts following the first drives, since the clamp can settle as the spring moves.
Where coating is scratched, a zinc-rich touch-up product is generally more suitable than standard paint.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90365A |
| UPC | 614901108422 |
| Profile | Square |
| Thread | 9/16 in -18 |
| Size | 2.4375 in x 7.8215 in |
| Material | Low-alloy, high strength steel |
| Grade | Equivalent to Grade 5 |
| Finish | Clear zinc plated |
Vehicle fitment
Before ordering, check that your vehicle’s year, model and trim suit this U-bolt. Compare the 9/16 in -18 thread and the 2.4375 in by 7.8215 in length against your axle and spring.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One square U-bolt with hardware, part number 13-90365A.








