Overview
The Pro Comp 13-90347 is a square U-bolt in bulk form with a plain finish. It has a 5/8 in -18 thread and measures 2 5/8 in by 14 in.
Because it comes without hardware, the nuts and any washers need to be sourced to suit the U-bolt.
Key features
- Square profile
- 5/8 in -18 thread
- Plain finish
- Bulk form
Sourcing nuts and washers
A bulk U-bolt leaves the clamp hardware to you, so the nuts and washers are chosen to match the U-bolt and the plate. Start with the thread, since the nut must engage it fully without cross-threading. Then check the seat of the nut against the clamp plate, because a poor seat can let the clamp pull unevenly.
Thick washers spread the clamp load on the plate and reduce the chance of the nut digging in. Keep the thread clean and free of rust before assembly, and avoid reusing nuts that have been over-tightened or worn. Torque the nuts evenly in stages so the axle seats squarely against the spring.
Because this U-bolt has a plain finish, store leftover parts somewhere dry and check the steel for surface rust before reuse.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90347 |
| UPC | 614901130904 |
| Profile | Square |
| Thread | 5/8 in -18 |
| Size | 2 5/8 in x 14 in |
| Finish | Plain |
| Hardware | Not included |
Vehicle fitment
Because this U-bolt ships in bulk, fit depends on the axle and spring you are building around. Measure the 5/8 in -18 thread and the 2 5/8 in by 14 in length against your setup. Check that your vehicle’s year, model and trim suit this part before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One square U-bolt, part number 13-90347. Not included: nuts and hardware.








