Overview
The Skyjacker SKY58X3X1712 is a U-bolt kit with an E-coated finish. Each U-bolt is supplied with two nylon insert lock nuts, and the kit is sold as a single unit.
Skyjacker’s U-bolt range includes square, round and semi-round ends in lengths from 1.75 to 19 inches. Measure the U-bolts you are replacing and compare them with this kit before ordering.
Key features
- E-coated for corrosion resistance
- Two nylon insert lock nuts with every U-bolt
- Sold as a single unit
- Kit for spring and axle clamping
Dealing with road salt
Road salt and wet grit are hard on any exposed steel, and clamps on the axle take the worst of it. Wash the underside after winter driving, paying attention to the U-bolt legs and nut threads where moisture collects. Dry the threads before reassembly so the nuts can grip evenly. Stainless or zinc-plated hardware can be a reasonable choice in salt country, though it is worth comparing finishes before buying.
Inspect the coating at each service and look for bubbling, flaking or pitting near the bends. Small scratches can be touched up with a rust-inhibiting paint, while deep pitting means the bolt is losing section and should be replaced. Carry a spare lock nut on longer trips, since a corroded nut often fails before the bolt does.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKY58X3X1712 |
| Product type | U-bolt kit |
| Finish | E-coated |
| Included hardware | 2 nylon insert lock nuts with each U-bolt |
| Sold as | Single |
Vehicle fitment
Because the spring and axle decide fit, check your truck’s year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check each U-bolt in the SKY58X3X1712 kit for fit before tightening, and use the nylon insert lock nuts that come with it. Follow the torque figure given for your vehicle.
What’s included
The SKY58X3X1712 kit includes its U-bolts with two nylon insert lock nuts per bolt.







