Overview
The Skyjacker JK23-H is a polyurethane spacer leveling kit for the 2007–2018 Jeep Wrangler (JK). It provides a 2 inch front lift and a 3/4 inch rear lift and includes two front 70 shocks.
It provides a leveled off-road stance. Other parts are required to complete the kit. The limited lifetime warranty covers the kit.
The front is raised 2 inches and the rear 3/4 inch, so the front sits higher than the rear. The kit includes 2 front 70 shocks. Other parts are required for a complete kit, so confirm which additional parts your setup needs before ordering.
Key features
- 2 inch front lift
- 3/4 inch rear lift
- Polyurethane spacers
- Includes 2 front 70 shocks
- Front position
- Limited lifetime warranty from Skyjacker
Choosing a leveling setup
A leveling kit raises the front of the vehicle to match the rear, which means the front and rear lift are chosen to balance the stance. Polyurethane spacers are a common way to do this because they sit between existing components and are simple to install. Because the front is raised more than the rear, the change in geometry affects how the vehicle tracks and how the driveline angles change at the rear.
Leveling changes suspension geometry, so related parts are often replaced or checked at the same time. Sway bar links, brake lines and steering components should be inspected for stretch or binding. Tire size is a major consideration, since larger tires add rubbing risk and load to components. Check the shocks and bushings for wear before adding spacers, because a worn suspension will not perform well under a higher stance.
- Inspect brake lines for stretch after installing spacers
- Check sway bar links and bushings for wear
- Look at tire clearance on full steering lock
- Recheck torque on spacer hardware after initial driving
- Verify driveline angles after the lift
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JK23-H |
| UPC | 803696253732 |
| Product type | Polyurethane spacer leveling kit |
| Front lift | 2 inches |
| Rear lift | 3/4 inch |
| Material | Polyurethane |
| Shocks included | 2 front 70 shocks |
| Position | Front |
| Fitment | Direct fit |
| Warranty (per Skyjacker) | Limited lifetime |
Vehicle fitment
The kit fits the 2007–2018 Jeep Wrangler (JK) in these trims:
- 2007–2018 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X)
Each line shows the model years, make and model, with the trims in parentheses.
The list covers the Wrangler (JK) only. It does not include the TJ, LJ or JL generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension work changes ride height, steering geometry and brake-line and driveline clearances, so professional installation is recommended. Torque fasteners to specification, recheck them after some driving, and get an alignment after installation. Verify tire and wheel clearance before driving and check local rules on lift height.
What’s included
Polyurethane spacers for a 2 inch front lift and a 3/4 inch rear lift, plus 2 front 70 shocks.
Not included: Other parts are required to complete the kit.









