Overview
The Skyjacker JL15RBPMLT is the Rubicon coil spring lift for the 2018 Jeep Wrangler JL Unlimited Rubicon. It pairs dual rate long travel coil springs with four M95 long travel shocks, for a 1 to 1.5 inch lift with a listed range of 0 to 2.25 inches.
The coils carry a different left and right rate designed for the JL. The first rate gives a highway ride, and the coil expands during articulation so it stays in the upper bucket at full droop. The second rate starts only after compression passes the first, and it controls body roll and heavy off-road suspension movement.
Extended front sway bar end links and front and rear bump stop extensions round out the package. The M95 shocks are monotube units, and they are length fitted for the maximum extension available at full articulation. Grade 8 hardware is included, along with a limited lifetime warranty.
Key features
- Dual rate long travel coil springs, front and rear
- Left and right coil rates designed for the JL
- Four M95 long travel shocks
- Extended front sway bar end links
- Front and rear bump stop extensions
- Grade 8 mounting hardware
Shock choice and rebound
Shock choice affects ride quality as much as control. Shocks sized for the lifted height give the suspension the extension it needs, while the valving decides how quickly the body settles after a bump. A lift changes the angle and extension of each shock, so the shock length must suit the new travel. Length-fitted shocks are chosen to match the extension needed for articulation, which is why they are sized with the rest of the kit.
Check shock mounts, bushings and brackets after installation, since the angles change once the truck sits higher. Look for leaks, worn eyes and bent shafts during regular inspections. The extended front sway bar end links are designed to go in with the coils, so inspect their bushings for wear and replace any that are cracked or loose before reassembly.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JL15RBPMLT |
| UPC | 803696256573 |
| Suspension type | Coil spring kit |
| Lift range | 0 to 2.25 inch |
| Front shocks | M95, four included |
| Max tire size | 37 x 12.50 street articulation, 35 inch off-road full articulation |
| Recommended wheel | 9 inch with 0 offset |
| Warranty | Limited lifetime |
| Fitment type | Direct fit |
Vehicle fitment
The listed fitment is the 2018 Jeep Wrangler (JL) Unlimited Rubicon, four-door.
Non-Rubicon JL models use the JL15BPMLT kit instead, and two-door Wrangler JL models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lift kits this tall change the alignment and the driveline angles, so have both checked after the kit is installed. The bump stop extensions and sway bar end links should be fitted at the same time as the coils.
What’s included
Dual rate long travel coil springs front and rear, four M95 long travel shocks, front extended sway bar end links, front and rear bump stop extensions, and Grade 8 mounting hardware.













