Overview
The Rubicon Express RE6200T is a 5.5-inch Extreme-Duty short arm lift kit for the Jeep Cherokee XJ, with twin tube shocks included. It fits the 1984-2001 Jeep Cherokee (XJ). It is the twin tube version of the RE6200 and uses the same heavy-duty track bar, front control arm relocation brackets and Extreme-Duty rear leaf springs.
The system is a complete replacement suspension for XJ Cherokees with factory short arm geometry, built for heavy trail running. The heavy-duty track bar and relocation brackets add flexibility and improve suspension geometry, which also contributes to a steadier ride on pavement. The kit adds replacement front tuned coil springs, new control arms with Super-Flex spherical ball joints and Gen II sway bar disconnects. It covers a 5 to 6.99-inch lift range.
Key features
- 5.5-inch lift height, within the 5 to 6.99-inch range
- Twin tube shocks included
- Heavy-duty track bar
- Front control arm relocation brackets
- Replacement front tuned coil springs
- Extreme-Duty rear leaf springs
- Control arms with serviceable Super-Flex spherical ball joints
- Gen II sway bar disconnects and PT-Meg Super-Ride bushings
Before you install
A short arm lift changes the geometry at the front and rear axles, so the parts that connect the axles to the frame work differently afterward. A track bar tuned for the new height keeps the axle centered under the vehicle. Twin tube shocks suit a Cherokee that spends most of its time on pavement and still handle trail use at moderate speeds.
Plan to inspect the steering and driveline components that are often worn on an XJ before lifting it. Ball joints, tie rod ends and track bar bushings are common candidates, and a worn joint is hard to judge once new control arms are bolted in. Look for play at the joints, uneven tire wear and a wandering steering wheel as signs that parts need attention.
- Inspect track bar bushings for cracks
- Check tie rod ends for play before the install
- Recheck torque on all bolts after the first trail run
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE6200T |
| UPC | 614901453119 |
| System type | Extreme-Duty Super-Flex short arm |
| Lift height | 5.5 inches (chart range 5 to 6.99 inches) |
| Rear lift method | Leaf springs |
| Track bar | Heavy duty, adjustable |
| Joints | Serviceable Super-Flex spherical ball joints |
| Shocks | Twin tube, included |
Vehicle fitment
It fits the 1984-2001 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport versions.
The Wrangler and Grand Cherokee generations are not part of this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The leaf springs, relocation brackets and new control arms change the suspension at every corner, so the alignment and caster should be checked after the install.
What’s included
The kit includes replacement front tuned coil springs, Extreme-Duty rear leaf springs, a heavy-duty track bar, front control arm relocation brackets, control arms with Super-Flex spherical ball joints, Gen II sway bar disconnects and twin tube shocks.


