Overview
The Pro Comp 66130K is a 2-inch spacer system for the 2018 Jeep Wrangler JL, in two-door and four-door models. The kit uses steel coil spring spacers, bump stop extensions and sway bar drops to raise the vehicle while keeping the factory springs and dampers in place. The lift range is 2 to 2.5 inches.
The bump stop extensions keep clearance for 35-inch tires and 37-inch tires on Rubicon models. The spacers prevent over-compression of the factory coil springs without loss of suspension travel, and the kit needs no driveline or exhaust modifications.
Key features
- Steel coil spring spacers with index pins and holes that locate the factory isolators
- Bolt-on bump stop extensions for 35-inch and 37-inch tire clearance on Rubicon models
- Prevents over-compression of the factory coil springs without loss of travel
- Sway bar drops that help maintain the operating angle
- No drive line or exhaust modifications required
Spacers and factory shocks
Spacer systems keep the factory springs and dampers working while raising the body, so the shocks take on the new ride height without a full suspension swap. Because the factory shocks stay in use, their condition matters more. Worn shocks may feel soft on the road and may not control the body well once the spacers raise the truck.
Check the factory shocks for leaks, worn bushings and loose mounts before installing spacers, and replace them if they are weak. Keep an eye on the bump stops and sway bar links as well, since the new ride height changes their working range. Tire choice affects rubbing near the fenders, so test steering lock and suspension articulation once the install is finished.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 66130K |
| UPC | 614901278620 |
| Type | Suspension spacer system |
| Lift height | 2 to 2.5 inches |
| Lift method | Front coil spacers, rear spacers |
| Shocks | Not included |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2018 Jeep Wrangler JL in the Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims.
It is for the 2018 Wrangler JL only. Earlier Wrangler generations, including the JK, and the Gladiator are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spacers locate on the factory isolators. No driveline or exhaust work is needed. Have the alignment checked after installation, because the lift changes the ride height.
What’s included
Steel coil spring spacers, bump stop extensions and sway bar drops. Not included: shock absorbers.






































