Overview
The Pro Comp EXPK4213BF is a 6-inch Stage III 4-link suspension lift kit with FOX shocks for the 2017–2019 Ford F-250 and F-350 Super Duty. It is a direct fit for both trucks, with FOX shocks at the front and rear.
A 4-link suspension locates the axle with four control links instead of leaf springs, which keeps the axle in position under power and braking. This Stage III kit uses a block and U-bolt at the rear and the 2.0 Performance Series IFP shock from FOX, which Pro Comp names in the specifications.
Key features
- Stage III 4-link design with a 6-inch lift and a 6–7 inch lift height range
- FOX 2.0 Performance Series IFP shocks, fitted front and rear
- Block and U-bolt rear lift component
- Direct fit to the listed 2017–2019 Super Duty trucks
- Pro Comp describes its kits as built with racing-influenced engineering
Living with a 4-link
A 4-link setup relies on its control links, mounts and bushings to hold the axle square, so those parts are the first place to look when the handling changes. Inspect each link end for play, check the mounts for cracks, and listen for clunks over bumps that could signal a worn bushing.
Because the links change the axle’s geometry, the driveline angles should be checked after an install and after any change in tire size or load. Shock action matters too: a shock that has lost damping can make the axle hop under braking. Keep the shocks clean and check the mounts each season.
Owners running a 4-link on daily drives should expect a short adjustment period as the axle settles. A quick recheck of mounts and bolts after the first few weeks is a sensible habit.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK4213BF |
| Kit type | 4-link lift kit, complete suspension system |
| Kit stage | Stage 3 |
| Lift height | 6 inches, with a lift height range of 6–7 inches |
| Shock series | 2.0 Performance Series IFP |
| Front shocks | FOX |
| Rear shocks | FOX |
| Rear lift component | Block and U-bolt |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 2017–2019 Ford F-250 Super Duty and 2017–2019 Ford F-350 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
Trucks from 2016 and earlier and from 2020 onward are outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A 4-link conversion changes the axle’s control geometry, so the pinion angle, the driveline angles and the alignment all need to be checked after the lift is installed.
What’s included
FOX shocks are included at the front and rear. Check the package contents against your installation before starting, especially the 4-link components.

























