Overview
The Tuff Country 42105 is a 2 inch coil spacer lift for the Jeep Wrangler JL, covering the 2018 Wrangler (JL) Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S models. Its coil spacers allow up to 37 inch tires.
The kit uses front and rear coil spring spacers made of polished aluminum, which Tuff Country says are made in the USA. Installation is bolt-on and requires no drilling. Shocks are not included, so the existing shocks are used or new ones are fitted separately.
Key features
- 2 inch lift for the Wrangler JL, two-door and four-door
- Front and rear coil spring spacers
- Polished aluminum spacers, made in the USA
- Bolt-on installation, no drilling required
- Fits 35 to 37 inch tires
- Limited lifetime warranty
Coil spacers and tire clearance
Coil spacers raise the body on the existing springs, so the axle and driveline move to a new angle. A 2 inch lift usually calls for a check of the front and rear driveline angles, especially if vibration appears at highway speeds. Inspect the U-joints and slip yokes at regular intervals, and look for rust or wear at the joints.
The shock length also matters because the suspension sits in a different position at rest and at full compression. After installing spacers, check that the shocks have enough travel at both ends, and look for bottoming on rough roads. Aluminum spacers are durable, but the bolts and threads should be checked for tightness after the first few trail runs.
- Driveline angles at highway speed
- U-joint and slip yoke wear
- Shock travel at full extension and compression
- Spacer bolt torque after trail use
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 42105 |
| UPC | 698815421051 |
| Lift | 2 inch |
| Suspension type | Spacer |
| Front lift | Coil spring spacers |
| Rear lift | Coil spring spacers |
| Tire fitment | 35 to 37 inch tires |
| Shocks | Not included |
Vehicle fitment
It fits the 2018 Jeep Wrangler (JL), including Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S models.
This kit is fitted to 2018 Wrangler JL models. Verify the year, model and trim of your Wrangler before ordering.
Installation notes
The spacers are bolt-on, with no drilling required. A 2 inch lift changes the driveline angles, so check them after installation, and confirm that the shock length works with the lift.
What’s included
The kit includes front and rear coil spring spacers made of polished aluminum.
Not included: Shocks.














