Overview
It is a pair of 3/8 inch leaf spring center pins with nuts, part number RE1483. The pins have a universal design for leaf spring applications.
Rubicon Express says to choose the pin diameter for your application. The pins are longer than needed and are cut down after installation, so allow for that trimming when you plan the install.
Leaf spring centering and pins
Center pins hold the leaf spring in position on the axle seat and keep the spring from shifting side to side under load. Pins that are too loose can wear the spring eye, while pins that are too tight can make alignment difficult. Choose pins that match the spring hole and the axle seat so the spring sits square.
Cutting pins to length is a fitting step that should be done with the spring installed and the vehicle at ride height. Measure carefully and leave enough thread for the nut to seat fully. Leaf springs take a lot of load, so re-check the pins and nuts after the first drives on rough trails, and replace any pins that show bending or galling.
- Measure with the spring in place
- Leave enough thread for the nut
- Re-check pins after rough trails
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1483 |
| UPC | 614901438468 |
| Pin diameter | 3/8 inch |
| Sold as | Pair, with nuts |
| Design | Universal |
| Length | Longer than needed; cut down after installation |
Vehicle fitment
The pins are a universal design for leaf spring applications. Check the diameter and length against your spring and axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cut the pins to length after installation, since they are longer than needed. Measure with the spring in place before cutting.
What’s included
A pair of center pins with nuts.







