Overview
The Rancho RS8129 is a leaf spring center bolt kit with two 7/16 inch diameter bolts, each 4 inches long. Two 7/16 inch nuts are supplied with the bolts. The product is labeled universal fit, so no specific vehicle is named for it.
Replacing a leaf spring center bolt
A leaf spring center bolt locates the spring pack and keeps the leaves aligned over the axle seat, so it carries side loads as well as the weight of the vehicle. When a bolt wears, the spring can shift on its seat, which often shows up as clunking over bumps or a spring that rotates on the perch.
Before fitting new hardware, inspect the spring pack for cracked leaves, enlarged holes and rust between the leaves. A new center bolt cannot correct a damaged spring, so address any of those conditions first. Once the axle is seated under the vehicle’s weight, tighten the nut to the torque value in your service manual and recheck it after the first few drives.
- Inspect the center hole of each leaf for elongation
- Clean rust from the spring seat before fitting
- Replace the bolt and nut as a matched pair
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS8129 |
| UPC | 39703812900 |
| Bolt diameter | 7/16 inch |
| Bolt length | 4 inches |
| Quantity | Two bolts and two nuts |
| Fitment | Universal fit |
Vehicle fitment
No year, make or model is named for the RS8129. Compare the 7/16 inch diameter and 4 inch length against your current leaf spring bolt before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two 7/16 inch diameter by 4 inch leaf spring center pin bolts and two 7/16 inch nuts.







