Overview
The Rancho RS8127 is a leaf spring center bolt kit, also called a center pin bolt set. It contains two 5/16 inch diameter bolts, each 5 inches long, with a matching 5/16 inch nut for each. It is a universal fit kit.
Center pin bolts and clamping
A center pin bolt holds the leaf spring’s center pin in place and keeps the spring located over the axle seat. When the center bolt works loose or the pin hole wears, the spring can shift side to side, which affects steering and axle control.
Look at the bolt and pin hole when inspecting a spring. A bent, stretched or corroded bolt should be replaced, and damaged threads or a worn pin hole call for more than a bolt change. Rust between the spring and the axle seat can also let the spring move, so clean those surfaces when the spring is off.
Tighten the center bolt to the correct torque for your spring setup, and check it again after the first drive on rough roads. Keep a spare bolt and nut in the toolkit on a trail vehicle, since a lost bolt can leave the spring unsecured.
- Inspect bolt threads for damage
- Look for rust at the seat
- Recheck tightness after the first drive
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS8127 |
| UPC | 39703812702 |
| Bolt diameter | 5/16 inch |
| Bolt length | 5 inches |
| Quantity | Two center pin bolts and two nuts |
| Fitment | Universal fit |
Vehicle fitment
No specific vehicles are named for the RS8127. Because it is universal fit, confirm the 5/16 inch bolt size matches your leaf spring before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two 5/16 inch diameter by 5 inch leaf spring center pin bolts and two 5/16 inch nuts.







