Overview
The Pro Comp Suspension 97-716B is a leaf spring centering pin, 7/16 inch in diameter and 4.5 inches long. It is sold as a pair. Pro Comp recommends centering pins whenever a leaf spring pack is modified or changed.
It is a universal fit pin. A centering pin locates the leaves of a spring pack, so it must match the holes in the pack rather than a vehicle model.
Choosing the right pin
A centering pin keeps the leaves of a spring pack lined up with each other, so the pack stays together as it flexes. When a pack is taken apart, the pins and clamp bolts are often replaced along with the leaves, since worn holes can let the leaves shift under load. Before buying, compare the pin with the holes in the pack, paying attention to how snugly it seats without forcing it.
Inspect the old pins before reuse. Look for bent shafts, rounded ends, galling and wear on the sides where the leaves press against them. Check the leaves around each hole for cracks, and look at the shackles and bushings the pack works with. After the first few drives, re-check the clamp hardware, since the pack settles as the pins seat.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 97-716B |
| UPC | 614901170016 |
| Diameter | 7/16 inch |
| Length | 4.5 inches |
| Quantity | Pair |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Measure the spring pack holes before installing the pins.
What’s included
A pair of leaf spring centering pins.







